Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 1425 of 4547

This flanged sleeve bearing is made from SAE 841 bronze with USDA H-1 approved lubricant. It has a 1/2 in bore, 3/4 in OD, and 3/4 in length. Suitable for applications where incidental food contact may occur, such as conveyors, mixers, and bottling lines. Sold in a pack of 3.

BUNTING BEARINGS

BUNTING BEARINGS Lubricated Food-Grade Metallic Flanged Sleeve Bearing

BrandBUNTING BEARINGS

Sign inAvailable

Metric double-row angular contact bearing with double rubber seals (2RS), ABEC 1 tolerance, thermoplastic cage, and C3 internal clearance. Designed to accommodate combined radial and axial loads in applications such as industrial machinery, pumps, gearboxes, and conveyors where thermal expansion and contaminant protection are required.

TRITAN 5208 2RS/C3 PRX High-Clearance Double-Row Angular Contact Bearing

BrandTRITAN

Sign inAvailable

GATES PowerGrip GT3 Timing Belt

BrandGATES

Sign inAvailable

This flanged sleeve bearing is made from black PEEK plastic for low-friction operation. It has a 1/2 in bore, 3/4 in OD, and 1/2 in overall length. Sold in a pack of three. Commonly used in industrial machinery to support rotating shafts and reduce wear in applications where lubrication is difficult.

OILITE Low-Friction Plastic Flanged Sleeve Bearing

BrandOILITE

Sign inAvailable

No image available

SILVERTHIN BEARING

SILVERTHIN BEARING General Purpose Thin-Section Ball Bearing SB045CPO

BrandSILVERTHIN BEARING

Sign inAvailable

This lubricated general purpose metallic sleeve bearing is made from SAE 841 bronze. It features a 5/8 in bore, 1 in OD, and 3/4 in length, with a maximum PV rating of 50,000 lb/sq in-fpm. Suitable for supporting rotating shafts in conveyors, pumps, and light machinery under moderate loads and speeds. Sold in packs of 5.

OILITE SAE 841 Bronze Sleeve Bearing

BrandOILITE

Sign inAvailable

This food-grade pillow block ball bearing is constructed with stainless steel and features set screw locking. It has a 2-inch bore, 2 1/2-inch shaft height, and 5/8-inch mounting bolt size, following the inch system of measurement. Suitable for applications requiring corrosion resistance and easy cleaning, such as in wet or humid industrial environments.

IPTCI BEARINGS SUCSP211-32 Food-Grade Pillow Block Ball Bearing

BrandIPTCI BEARINGS

Sign inAvailable

No image available

OEM Quick Detachable Bushing, Metric, 28 mm Bore, 1.313 in Length, 3/4 in/ft Taper

BrandOEM

Sign inAvailable

This stainless steel male threaded fixed rod end features a plain bearing design with right-hand threads. It has a 60 mm hole center-to-end length and 12 mm eye thickness. Used in mechanical linkage systems to connect threaded rods to clevises or brackets for linear motion transfer in industrial machinery and automation equipment.

AMPG ZEBM10X60-174 Stainless Steel Male Threaded Fixed Rod End

BrandAMPG

Sign inAvailable

Steel mounting bracket designed to attach a BVS-510F/FS vibrator to wooden forms. Used in concrete construction to secure the vibrator and transfer vibration into the form for consolidation.

VIBCO BVF-21 Wood Form Mounting Bracket for BVS-510F/FS, Steel

BrandVIBCO

Sign inAvailable

← Prev 1…1423 1424 1425 1426 1427…4547 Next →