settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 1439 of 4547

One-piece steel shaft collar with metric, round, clamp-on design. Bore diameter 65 mm, collar width 19 mm. Used for axial positioning and securing components on shafts in industrial machinery, conveyors, and automation systems.

RULAND MANUFACTURING

RULAND MANUFACTURING MCL-65-F Steel Shaft Collar, 65 mm Bore, 19 mm Width

BrandRULAND MANUFACTURING

Sign inAvailable

Round, two-piece rigid shaft coupling with 5/8 in bore diameter for both bore 1 and bore 2. Designed for non-flexible connections between shafts of equal diameter in power transmission systems, conveyors, and machinery requiring precise alignment and zero backlash.

CLIMAX METAL PRODUCTS

CLIMAX METAL PRODUCTS Two-Piece Rigid Shaft Coupling, 5/8 in Bore, Round

BrandCLIMAX METAL PRODUCTS

Sign inAvailable

This size 50 plain-bore roller chain sprocket is designed for single-strand 50 chain. It features 18 teeth and a 3.599-inch pitch diameter. The one-sided hub allows for mounting on shafts in power transmission systems such as conveyors and packaging machinery.

OEM

OEM APPROVED VENDOR Size 50 Plain-Bore Roller Chain Sprocket

BrandOEM

Sign inAvailable

This lubricated general purpose metallic sleeve bearing is made from SAE 841 bronze and pre-lubricated with SAE 30 oil. It has a 12 mm bore, 15 mm OD, and 16 mm length, with an operating temperature range of 10°F to 220°F. Suitable for low-speed, light-to-moderate load applications such as conveyors, packaging machinery, and agricultural equipment. Sold in a pack of 5.

BUNTING BEARINGS

BUNTING BEARINGS SAE 841 Bronze Sleeve Bearing

BrandBUNTING BEARINGS

Sign inAvailable

This Type T chain guide is designed for single-pitch Chain # 40, constructed from black UHMWPE with a center channel. It provides a low-friction surface for chain conveyance in industrial material handling systems, reducing wear and noise. The guide is supplied without a mounting frame.

MJ MAY

MJ MAY Type T Chain Guide without Mounting Frame

BrandMJ MAY

Sign inAvailable

Spiral bevel gear with 45 teeth, module 2, gear ratio 3, and right-hand spiral direction. Made of black oxide-coated steel with induction-hardened teeth. Designed for transmitting power between intersecting shafts at a right angle, commonly used in industrial machinery and drive systems requiring smooth and quiet operation.

KHK GEARS

KHK GEARS SBS2-4515R Spiral Bevel Gear

BrandKHK GEARS

Sign inAvailable

This short set screw slit coupling connects two shafts with bore diameters of 10 mm and 5/16 in, featuring a round bore type and an overall length of 27/32 in. It is designed for motion control applications requiring precise shaft alignment and torque transmission, such as in encoders, stepper motors, and precision positioning equipment.

RULAND MANUFACTURING

RULAND MANUFACTURING Short Set Screw Slit Coupling

BrandRULAND MANUFACTURING

Sign inAvailable

This flanged sleeve bearing is made from SAE 841 bronze with embedded SAE 30 oil lubrication. It has a 3/8 in bore, 5/8 in OD, and 1 in length. The flanged design aids axial location in applications such as conveyors and packaging machinery. Sold in a pack of 3.

BUNTING BEARINGS

BUNTING BEARINGS SAE 841 Bronze Flanged Sleeve Bearing

BrandBUNTING BEARINGS

Sign inAvailable

This right angle hollow shaft DC gearmotor operates at 90V DC with a TENV enclosure. It delivers 16 RPM output and 831 in-lb maximum torque at a 120.2:1 ratio, with a full load current of 3 A. Suitable for applications requiring low-speed, high-torque bidirectional rotation, such as conveyor systems and indexing tables.

BISON

BISON Right Angle Hollow Shaft DC Gearmotor 021-730D0120

BrandBISON

Sign inAvailable

Inch-system carbon steel tapered roller bearing cone with 4 in bore, 7.05 in outside diameter, and 2.265 in cone width. Designed for use with compatible cup HH221410 to form a complete bearing assembly. Supports combined radial and axial loads in applications such as gearboxes, conveyors, and mining equipment.

NTN

NTN HH221449PW2 Tapered Roller Bearing Cone

BrandNTN

Sign inAvailable

← Prev 1…1437 1438 1439 1440 1441…4547 Next →