settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 1577 of 4547

This aluminum clamp-on beam shaft coupling accommodates 3° angular misalignment and connects shafts with different bore dimensions. It features a 15 mm bore on one side and a round body. Suitable for motion control and light-duty power transmission applications.

RULAND MANUFACTURING

RULAND MANUFACTURING FCMR32-15-11-A General Purpose Clamp-On Beam Shaft Coupling

BrandRULAND MANUFACTURING

Sign inAvailable

RULAND MANUFACTURING

RULAND MANUFACTURING MBC51-25-25-A Clamp-On Bellows Shaft Coupling

BrandRULAND MANUFACTURING

Sign inAvailable

This high-precision clamp-on beam shaft coupling accommodates up to 3° angular misalignment. It features a round aluminum body with a 6 mm bore diameter 1 and a 3/16" bore diameter 2, enabling inch-to-metric shaft connections. Suitable for motion control applications requiring precise shaft alignment.

RULAND MANUFACTURING

RULAND MANUFACTURING High-Precision Clamp-On Beam Shaft Coupling

BrandRULAND MANUFACTURING

Sign inAvailable

This fixed-bore timing pulley with hub is designed for HTD (curvilinear) synchronous belt drive systems. It features 32 teeth with a 5 mm pitch and accommodates a 9 mm wide belt. Constructed from aluminum with a clear anodized finish, it is suitable for applications requiring precise rotary motion transmission without slippage, such as industrial machinery and automation equipment.

Dayton

Dayton 32-5M09-6FA3 HTD Section Fixed-Bore Timing Pulley with Hub

BrandDayton

Sign inAvailable

This long set screw slit coupling has a 6 mm bore diameter on both ends and a 13 mm outside diameter. It is used to connect two rotating shafts, compensating for minor misalignment while transmitting torque. Suitable for motion-control applications requiring zero backlash and high torsional stiffness.

RULAND MANUFACTURING

RULAND MANUFACTURING Long Set Screw Slit Coupling

BrandRULAND MANUFACTURING

Sign inAvailable

Steel male threaded fixed rod end with black oxide finish. Right-hand threading, 1/2"-13 thread size, and 5-inch thread length. Used to connect threaded rods or clevises to machine components, allowing for angular misalignment in industrial linkages.

KEN FORGING

KEN FORGING Steel Male Threaded Fixed Rod End

BrandKEN FORGING

Sign inAvailable

Flange-mount spherical roller bearing with a 3 7/16 in cylindrical bore, cast iron housing, and concentric collar for secure shaft mounting. Not split, lubricated with LC-2 Lithium Complex Grease. Requires 3/4 in mounting bolts. Supports heavy radial and moderate axial loads in industrial machinery such as conveyors, fans, and material handling equipment.

MOLINE BEARING

MOLINE BEARING 4-Bolt Flange-Mount Spherical Roller Bearing

BrandMOLINE BEARING

Sign inAvailable

This linear actuator from the LT series delivers a rated load of 225 lbf with a 9.8 in stroke, operating on 12V DC. The plastic nut material supports smooth motion, while the IP66 enclosure provides protection against dust and water ingress. Typical applications include industrial automation, material handling, and process equipment requiring controlled positioning.

DUFF-NORTON

DUFF-NORTON LT225-1-250 Linear Actuator, 225 lbf, 9.8 in Stroke, 12V DC, IP66

BrandDUFF-NORTON

Sign inAvailable

This one-piece shaft collar features a round, clamp-on design with recessed screws for secure mounting on shafts. Made of carbon steel, it has a 3 1/2 inch bore diameter and is inch-sized. Used in power transmission and industrial machinery to position and retain components on shafts.

CLIMAX METAL PRODUCTS

CLIMAX METAL PRODUCTS H1C-350 Steel Recessed-Screw Shaft Collar

BrandCLIMAX METAL PRODUCTS

Sign inAvailable

This bearing lock nut, industry number KM9, is used to secure bearings onto shafts in industrial equipment assemblies. It prevents axial movement of the bearing, ensuring reliable operation in rotating machinery such as conveyors, gearboxes, and pumps. The metric design with a 2 7/32 in face diameter matches standard KM9 dimensions.

STANDARD LOCKNUT

STANDARD LOCKNUT KM9 Bearing Lock Nut, Metric, 2 7/32 in Face Dia

BrandSTANDARD LOCKNUT

Sign inAvailable

← Prev 1…1575 1576 1577 1578 1579…4547 Next →