Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 574 of 4547

This flanged sleeve bearing is made from SAE 841 bronze and lubricated with SAE 90 Oil with PTFE. It has a 1-1/2 in bore, 1-3/4 in OD, and 1-1/2 in length, operating from -40°F to 460°F. Suitable for low-speed applications requiring radial load support and axial positioning, such as in conveyors, pumps, and agricultural machinery.

BUNTING BEARINGS

BUNTING BEARINGS Lubricated Low-Speed Metallic Flanged Sleeve Bearing

BrandBUNTING BEARINGS

Sign inAvailable

3-phase, TEFC hollow shaft right angle AC gearmotor. Operates at 33.6 RPM with 479 in-lb maximum torque on 230V AC. Suitable for moderate-speed, high-torque applications in industrial automation, conveyor systems, and material handling equipment.

BISON AC 027-730G0050 Hollow Shaft Right Angle AC Gearmotor

BrandBISON AC

Sign inAvailable

This SKF spherical roller bearing features a 140 mm bore, 300 mm outer diameter, and 102 mm overall width. It has a cylindrical bore and is grease lubricated. Designed to accommodate heavy radial loads and moderate axial loads, it is suitable for applications such as conveyors, fans, and gearboxes where shaft misalignment may occur.

SKF 22328 General Purpose Spherical Roller Bearing

BrandSKF

Sign inAvailable

Closed-loop neoprene timing belt with a 0.2-inch pitch and 1/4-inch top width. Features 132 trapezoidal teeth for synchronous power transmission in moderate-load industrial applications such as conveyors and packaging equipment.

GATES PowerGrip® XL Section Trapezoidal Timing Belt 264XL025

BrandGATES

Sign inAvailable

Fixed-bore timing pulley with hub for synchronous belt drives. Features 20 teeth with 5 mm pitch, designed for 15 mm wide HTD belts. Constructed from aluminum with a clear anodized finish. Suitable for applications requiring precise motion transfer and timing.

Dayton HTD Section Fixed-Bore Timing Pulley with Hub

BrandDayton

Sign inAvailable

Inch-system carbon steel tapered roller bearing cone with 10 1/2 in bore, 13.19 in OD, and 2.25 in cone width. Designed to pair with cup LM451310 for supporting combined radial and axial loads in gearboxes, conveyor systems, and wheel assemblies.

NTN LM451349 Tapered Roller Bearing Cone

BrandNTN

Sign inAvailable

Steel timing pulley with black oxide finish, designed for GT timing belt sections. Features a taper lock bushing system for secure mounting on shafts. Used in power transmission systems requiring synchronized motion with PowerGrip GT belts. Accommodates bushing size 1108.

OEM GT Section Taper Lock Bushed Timing Pulley

BrandOEM

Sign inAvailable

Steel sprocket for 3/8 in chain pitch (ANSI 35) with 14 teeth, 1/2 in bore diameter, and 1.685 in pitch diameter. Fixed-bore type for direct mounting on shafts. Used in power transmission systems such as conveyor drives and packaging machinery.

TRITAN Size 35 Fixed-Bore Roller Chain Sprocket, 14 Teeth, 1/2 in Bore, Steel

BrandTRITAN

Sign inAvailable

Eccentric yoke shaft with 1"-14 thread size, 5 1/4 in overall length, 2 1/4 in head diameter, and 7/8 in head length. Used in conveyor systems and industrial machinery for adjusting roller position to correct belt or chain misalignment.

SMITH BEARING Eccentric Yoke Shaft, SHAFT-1-1/4-E

BrandSMITH BEARING

Sign inAvailable

BANDO 170DXL037G Dual-Sided XL Section Trapezoidal Timing Belt

BrandBANDO

Sign inAvailable

← Prev 1…572 573 574 575 576…4547 Next →