Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 819 of 4547

Two-piece rigid shaft coupling with 1 7/16 in bore diameter on both ends and round keyed bores. Provides zero-backlash, torsionally stiff connection for precise shaft alignment in motion control systems. Suitable for packaging, printing, and automation equipment.

RULAND MANUFACTURING

RULAND MANUFACTURING SPC-23-23-F Two-Piece Rigid Shaft Coupling

BrandRULAND MANUFACTURING

Sign inAvailable

This fixed rod end is made of steel with a black oxide finish. It features right-hand M12-1.75 threading and a 30 mm thread length. Used to connect threaded rods or shafts in industrial machinery, conveyors, and automation systems for rigid, non-articulating joints in linear motion or positioning applications.

OEM Steel Male Threaded Fixed Rod End

BrandOEM

Sign inAvailable

This clamp-on bellows shaft coupling connects two keyed shafts with different bore dimensions—1-1/2 in and 35 mm—for inch-to-metric applications. It is used in precision motion control, servo systems, and encoders where zero backlash and high torsional stiffness are required. The stainless steel construction suits industrial environments needing corrosion resistance. Maximum speed: 10,000 RPM.

RULAND MANUFACTURING

RULAND MANUFACTURING Clamp-On Bellows Shaft Coupling for Keyed Shafts

BrandRULAND MANUFACTURING

Sign inAvailable

This quick detachable bushing features a 3/4 in per ft taper and a 1/2 in bore diameter. With an overall length of 2 in and flange thickness of 1/2 in, it is used to mount pulleys, sprockets, or couplings onto shafts in power transmission systems, enabling secure fit and easy installation or removal.

OEM Quick Detachable Bushing, SF Type, 1/2 in Bore, 2 in Length, 1/2 in Flange

BrandOEM

Sign inAvailable

Inch-system tapered roller bearing assembly with 31/32 in bore, 2 7/16 in OD, and 0.652 in cone width. Constructed with carbon steel rings and a pressed steel cage. Designed to support combined radial and axial loads in applications such as gearboxes, conveyors, and wheel hubs.

NTN 4T-17098/17244 Tapered Roller Bearing Assembly

BrandNTN

Sign inAvailable

BANDO 96XL025G Synchro-Link® XL Section Trapezoidal Timing Belt

BrandBANDO

Sign inAvailable

Short set screw slit coupling with 4 mm and 3 mm bore diameters and 8 mm outside diameter. Designed for connecting two shafts in motion control applications, compensating for minor misalignment while transmitting torque. Provides zero backlash and high torsional stiffness for precise positioning.

RULAND MANUFACTURING

RULAND MANUFACTURING Short Set Screw Slit Coupling, 8 mm OD, 4 mm x 3 mm Bores

BrandRULAND MANUFACTURING

Sign inAvailable

This plain-bore timing pulley with hub features an 8 mm pitch and 224 teeth, designed for use with 16 mm wide belts. The 1 in bore diameter allows for mounting on standard shafts. Suitable for synchronous power transmission in industrial machinery such as conveyor systems, packaging equipment, and automation applications.

CONTINENTAL SilentSync Plain-Bore Timing Pulley with Hub

BrandCONTINENTAL

Sign inAvailable

This long clamp-on slit coupling from RULAND MANUFACTURING features a 16 mm outside diameter with bore diameters of 6 mm and 3 mm. It is designed to connect two shafts in motion-control systems, compensating for misalignment while transmitting torque. Typical applications include use with encoders, stepper motors, and linear actuators where zero backlash and low bearing loads are required.

RULAND MANUFACTURING

RULAND MANUFACTURING MRLC16-6-3-A Long Clamp-On Slit Coupling

BrandRULAND MANUFACTURING

Sign inAvailable

This flanged keyless bushing uses a multi-screw locking assembly to provide a mechanical shaft-to-hub connection without keys or keyways. Designed for a 1 3/16 in shaft diameter, it has a 2 5/32 in outer diameter and 1.122 in width. Suitable for mounting pulleys, sprockets, or couplings in power transmission applications.

FENNER DRIVES Multi-Screw Locking Assembly Keyless Bushing

BrandFENNER DRIVES

Sign inAvailable

← Prev 1…817 818 819 820 821…4547 Next →