Send a part number, a photo, or a whole BOM — we supply it and stand behind it. EXW Singapore — collect from our office.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up

POWER XP

POWER XP is a brand of replacement battery packs and related power components for electronic access-control and door-locking systems. The line is built around direct-fit and cross-referenced battery assemblies that restore power to locks used in hospitality, commercial, institutional, and multi-family properties. Products are identified by manufacturer part numbers such as DL-2, DL-8, and DL-16, and by cross-references to common OEM battery designations including HTL-11, 884955, and UNICAN. The catalog covers 6V DC and 9V DC configurations with a nominal 2,900 mAh capacity, sized to fit specific lock models from Saflok and KABA ILCO. Physical dimensions vary by SKU—for example, 2 in height by 2.2 in width for Saflok S7400-12 and MT applications, 2 in by 2.5 in for Saflok IC, and 2 in by 1.93 in for KABA ILCO 700. These are consumable power components rather than lock mechanisms; they are specified by voltage, capacity, chemistry-compatible form factor, and the lock model they serve. Buyers typically select by matching the existing battery's voltage, dimensions, connector type, and cross-reference number to the replacement SKU. 3G Electric supplies the POWER XP line as part of its industrial-equipment distribution catalog, with multiple SKUs available for order and logistics support for global delivery. The product data provided for each SKU includes fitment model, voltage, capacity, dimensions, and cross-reference numbers, allowing maintenance and procurement teams to verify compatibility before purchase. For plants, hotels, campuses, and commercial buildings that operate electronic lock fleets, stocking the correct POWER XP replacement packs reduces downtime when batteries reach end of service. 3G Electric's role is to make those SKUs accessible with clear specification data and order handling, not to alter or repackage the manufacturer's design. The brand's focus is narrow and practical: provide drop-in battery power for installed lock hardware so that access control remains operational without replacing the lock itself. Because the packs are matched to specific lock families, the critical selection criteria are the lock model, the battery voltage, the physical envelope, and any listed cross-reference. Where a lock accepts a 6V DC pack, the POWER XP 2,900 mAh units are dimensioned to fit the corresponding Saflok models; where a 9V DC pack is required, the KABA ILCO 700-compatible unit is specified. This model-specific approach means a single lock family may have more than one POWER XP SKU depending on the exact lock variant and battery compartment geometry. Procurement and maintenance teams should treat the manufacturer part number and cross-reference as the primary identifiers, with dimensions and voltage as confirmation. 3G Electric lists these SKUs with the fitment and specification detail needed to match them to installed hardware, and supports orders with logistics coordination for delivery to the buyer's location. The catalog is structured so that a buyer can move from a known lock model or a removed battery's markings to a specific POWER XP part number without ambiguity. No installation, programming, or lock-disassembly service is implied; the product is the battery pack itself. For facilities that maintain mixed lock fleets, the practical benefit is a consolidated source for several model-specific packs under one brand, with consistent 2,900 mAh capacity across the 6V and 9V variants. 3G Electric's distribution covers these POWER XP lock battery SKUs alongside other industrial equipment lines, and the company handles order processing and shipping logistics for customers regardless of location.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
EXW Singapore
Collect or forward from our office
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Show
Page 1 of 1

About POWER XP

POWER XP is a brand of replacement battery packs and related power components for electronic access-control and door-locking systems. The line is built around direct-fit and cross-referenced battery assemblies that restore power to locks used in hospitality, commercial, institutional, and multi-family properties. Products are identified by manufacturer part numbers such as DL-2, DL-8, and DL-16, and by cross-references to common OEM battery designations including HTL-11, 884955, and UNICAN. The catalog covers 6V DC and 9V DC configurations with a nominal 2,900 mAh capacity, sized to fit specific lock models from Saflok and KABA ILCO. Physical dimensions vary by SKU—for example, 2 in height by 2.2 in width for Saflok S7400-12 and MT applications, 2 in by 2.5 in for Saflok IC, and 2 in by 1.93 in for KABA ILCO 700. These are consumable power components rather than lock mechanisms; they are specified by voltage, capacity, chemistry-compatible form factor, and the lock model they serve. Buyers typically select by matching the existing battery's voltage, dimensions, connector type, and cross-reference number to the replacement SKU. 3G Electric supplies the POWER XP line as part of its industrial-equipment distribution catalog, with multiple SKUs available for order and logistics support for global delivery. The product data provided for each SKU includes fitment model, voltage, capacity, dimensions, and cross-reference numbers, allowing maintenance and procurement teams to verify compatibility before purchase. For plants, hotels, campuses, and commercial buildings that operate electronic lock fleets, stocking the correct POWER XP replacement packs reduces downtime when batteries reach end of service. 3G Electric's role is to make those SKUs accessible with clear specification data and order handling, not to alter or repackage the manufacturer's design. The brand's focus is narrow and practical: provide drop-in battery power for installed lock hardware so that access control remains operational without replacing the lock itself. Because the packs are matched to specific lock families, the critical selection criteria are the lock model, the battery voltage, the physical envelope, and any listed cross-reference. Where a lock accepts a 6V DC pack, the POWER XP 2,900 mAh units are dimensioned to fit the corresponding Saflok models; where a 9V DC pack is required, the KABA ILCO 700-compatible unit is specified. This model-specific approach means a single lock family may have more than one POWER XP SKU depending on the exact lock variant and battery compartment geometry. Procurement and maintenance teams should treat the manufacturer part number and cross-reference as the primary identifiers, with dimensions and voltage as confirmation. 3G Electric lists these SKUs with the fitment and specification detail needed to match them to installed hardware, and supports orders with logistics coordination for delivery to the buyer's location. The catalog is structured so that a buyer can move from a known lock model or a removed battery's markings to a specific POWER XP part number without ambiguity. No installation, programming, or lock-disassembly service is implied; the product is the battery pack itself. For facilities that maintain mixed lock fleets, the practical benefit is a consolidated source for several model-specific packs under one brand, with consistent 2,900 mAh capacity across the 6V and 9V variants. 3G Electric's distribution covers these POWER XP lock battery SKUs alongside other industrial equipment lines, and the company handles order processing and shipping logistics for customers regardless of location.

Common Applications

  • Hospitality — POWER XP 6V DC 2,900 mAh pack for Saflok S7400-12 electronic door locks in guest rooms
  • Commercial office — POWER XP DL-8 6V DC pack for Saflok MT locks on tenant and common-area doors
  • Institutional facilities — POWER XP DL-2 6V DC pack for Saflok IC locks in campus and healthcare access control
  • Multi-family and mixed-use — POWER XP DL-16 9V DC pack for KABA ILCO Model 700 locks in shared entry systems
  • Maintenance stockrooms — POWER XP lock battery SKUs held as spares to replace depleted packs across mixed lock fleets
  • Access-control retrofits — POWER XP cross-referenced packs (HTL-11, 884955, UNICAN) used to match existing battery designations

Guides & Resources

Frequently asked questions

Common questions about POWER XP from 3G Electric.

What voltage and capacity are POWER XP door lock battery packs available in?

POWER XP lock battery packs in the 3G Electric catalog are listed in 6V DC and 9V DC configurations, each with a nominal 2,900 mAh capacity. The 6V DC units cover Saflok S7400-12, MT, and IC model locks, while the 9V DC unit fits KABA ILCO Model 700. Voltage and capacity are stated per SKU, so buyers should confirm the required voltage against the lock's original battery before ordering. Capacity is consistent across the listed SKUs at 2,900 mAh, but the physical dimensions and fitment differ by model.

How do I identify the correct POWER XP replacement for a Saflok lock?

Match the lock model to the POWER XP SKU's stated fitment. For Saflok S7400-12, the applicable pack is a 6V DC, 2,900 mAh unit measuring 2 in by 2.2 in. For Saflok MT, the pack is also 6V DC, 2,900 mAh, 2 in by 2.2 in, with manufacturer part number DL-8 and cross-reference HTL-11. For Saflok IC, the pack is 6V DC, 2,900 mAh, 2 in by 2.5 in, with MPN DL-2 and cross-reference 884955. Confirm the lock variant and battery compartment dimensions before selecting.

Does the POWER XP DL-16 battery fit KABA ILCO 700 locks?

Yes. The POWER XP DL-16 is a 9V DC battery pack with 2,900 mAh capacity, measuring 2 in height by 1.93 in width, and is listed as fitting KABA ILCO Model 700 locks. It cross-references to UNICAN battery packs. Buyers should verify the lock model and the existing battery's voltage and dimensions before ordering, since the DL-16 is a 9V unit and is not interchangeable with the 6V POWER XP packs used in Saflok applications.

What cross-reference numbers are available for POWER XP lock batteries?

The catalog lists cross-references including HTL-11 for the DL-8 (Saflok MT fitment), 884955 for the DL-2 (Saflok IC fitment), and UNICAN for the DL-16 (KABA ILCO 700 fitment). These cross-references help buyers match a POWER XP pack to a battery designation already in use or specified for the lock. Cross-reference numbers should be used alongside the lock model, voltage, and dimensions, not as the sole selection criterion, because a single cross-reference may map to more than one physical configuration.

Are POWER XP battery packs supplied with installation or lock programming?

No. POWER XP products in this line are battery packs only. They are replacement power sources for compatible electronic door locks. Installation, lock programming, and access-control system configuration are separate activities not included with the battery pack. Buyers should follow the lock manufacturer's procedures for battery replacement and any required system steps after power restoration. 3G Electric supplies the pack and handles order logistics; it does not provide on-site lock service.

Can 3G Electric ship POWER XP lock batteries outside Singapore?

Yes. 3G Electric distributes POWER XP lock battery SKUs with logistics support for global delivery. Orders are processed against the listed SKUs, and shipping arrangements are coordinated based on the destination and order details. Because the packs are small consumable components, they are typically shipped as standard freight or parcel items. Buyers outside Singapore should confirm lead time and any import requirements for batteries with their order, as battery shipping can be subject to transport regulations.