Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

3G Electric
RFQ CartGet a QuoteSign inSign up
SENCO logo

SENCO

SENCO is a manufacturer of pneumatic and cordless fastening tools, including nailers, staplers, screw guns, and related accessories. Founded in the United States, the brand has been active in the industrial fastening market since the mid-20th century, with a product line that spans light-duty trim work to heavy-duty framing and flooring applications. 3G Electric supplies a range of SENCO tools, covering air-powered cap staplers, pin nailers, siding nailers, flooring nailers, collated screw autofeed attachments, and cordless screw guns. These tools are used in construction, woodworking, and assembly operations where consistent fastener placement and cycle speed are required. SENCO tools are built to standard industry specifications: pneumatic models operate on compressed air at typical pressures of 70–120 psi, with air inlets of 1/4 in NPT. Cordless models use 18 V DC brushless motors, with no-load speeds ranging from 2,500 to 5,000 RPM and torque outputs from 42 to 70 in-lb. Fastener compatibility varies by model: cap staplers accept 21-gauge staples with 1/2 in crown width; pin nailers use 16-gauge nails with strip collation; siding nailers use 15° plastic or wire-collated nails; flooring nailers use strip-collated nails with glue collation. The tools feature operation modes such as bump fire, sequential, or combination, depending on the model. 3G Electric stocks over 30 SKUs of SENCO tools, each with published datasheets covering dimensions, weight, fastener capacity, and operating specifications. Logistics support includes global shipping and availability of replacement parts for select models. For procurement specialists and maintenance managers, SENCO tools offer a range of fastening solutions that can be matched to specific material thicknesses and joint requirements. The brand’s presence in the market is supported by a network of distributors, and 3G Electric provides direct access to these products with technical documentation to assist in specification and selection.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 2 of 13

About SENCO

SENCO is a manufacturer of pneumatic and cordless fastening tools, including nailers, staplers, screw guns, and related accessories. Founded in the United States, the brand has been active in the industrial fastening market since the mid-20th century, with a product line that spans light-duty trim work to heavy-duty framing and flooring applications. 3G Electric supplies a range of SENCO tools, covering air-powered cap staplers, pin nailers, siding nailers, flooring nailers, collated screw autofeed attachments, and cordless screw guns. These tools are used in construction, woodworking, and assembly operations where consistent fastener placement and cycle speed are required. SENCO tools are built to standard industry specifications: pneumatic models operate on compressed air at typical pressures of 70–120 psi, with air inlets of 1/4 in NPT. Cordless models use 18 V DC brushless motors, with no-load speeds ranging from 2,500 to 5,000 RPM and torque outputs from 42 to 70 in-lb. Fastener compatibility varies by model: cap staplers accept 21-gauge staples with 1/2 in crown width; pin nailers use 16-gauge nails with strip collation; siding nailers use 15° plastic or wire-collated nails; flooring nailers use strip-collated nails with glue collation. The tools feature operation modes such as bump fire, sequential, or combination, depending on the model. 3G Electric stocks over 30 SKUs of SENCO tools, each with published datasheets covering dimensions, weight, fastener capacity, and operating specifications. Logistics support includes global shipping and availability of replacement parts for select models. For procurement specialists and maintenance managers, SENCO tools offer a range of fastening solutions that can be matched to specific material thicknesses and joint requirements. The brand’s presence in the market is supported by a network of distributors, and 3G Electric provides direct access to these products with technical documentation to assist in specification and selection.

Common Applications

  • Construction framing — SENCO SN71P1 siding nailer for attaching exterior siding to wood or steel studs
  • Flooring installation — SENCO SHF200 air-powered flooring nailer for solid hardwood plank fastening
  • Trim and finish work — SENCO 7J0009N pin nailer for securing quarter-round and baseboard moldings
  • Drywall fastening — SENCO DS222-18V cordless drywall screw gun for high-volume screw placement
  • Decking and subfloor assembly — SENCO DS230-D1 collated screw autofeed attachment for rapid deck screw driving
  • Roofing underlayment — SENCO BC58 cap stapler for attaching felt or synthetic underlayment with cap staples

Frequently asked questions

Common questions about SENCO from 3G Electric.

What types of fasteners are compatible with SENCO air-powered cap staplers like the BC58?

The SENCO BC58 cap stapler is designed for 1/2-inch wide, 21-gauge staples with a maximum staple length of 5/8 inch. It uses crowned anvil and bump-fire operation. For optimal performance, use SENCO-branded staples or equivalent staples that meet these dimensional and gauge specifications. Always consult the tool’s datasheet for exact fastener requirements.

What is the difference between bump fire and sequential operation in SENCO nailers?

Bump fire mode allows rapid, repeated fastener driving by holding the trigger and bumping the tool’s contact tip against the work surface. Sequential mode requires the operator to depress the contact tip and then pull the trigger for each fastener, providing more controlled placement. SENCO models like the BC58 offer bump fire, while others like the SN71P1 and SHF200 use sequential mode. The choice depends on the application speed and precision needed.

Are SENCO cordless screw guns compatible with standard 18 V batteries?

SENCO cordless screw guns, such as the 10C0002N, 10A0002N, and DS222-18V, use 18 V DC brushless motors and come with a 4.0 Ah battery. They are designed to work with SENCO’s battery platform. While the voltage is standard, battery connectors and communication protocols may be proprietary. For reliable operation, use the battery and charger supplied with the tool or purchase genuine SENCO replacements.

What maintenance is required for SENCO pneumatic nailers?

Regular maintenance includes lubricating the tool with pneumatic tool oil before each use, checking for air leaks in hoses and fittings, and cleaning the magazine and driver assembly to remove debris. For models like the SN71P1 and SHF200, inspect the O-rings and seals periodically and replace them if worn. Store tools in a dry environment to prevent corrosion. Refer to the user manual for specific lubrication intervals and part numbers.

Can SENCO flooring nailers be used for engineered hardwood?

The SENCO SHF200 flooring nailer is designed for strip-collated nails with glue collation and is typically used for solid hardwood flooring. For engineered hardwood, check the manufacturer’s recommendations for fastener type and length. The tool’s sequential operation and 107-nail capacity allow for consistent placement, but ensure the nail length does not exceed the material thickness to avoid damage. Always test on a scrap piece first.

Does 3G Electric supply SENCO products?

Yes — 3G Electric (S) Pte. Ltd. supplies SENCO products. We stock the SENCO catalog and supply genuine factory-original products with full manufacturer warranty and technical support.