SPEED WIRING PRODUCTS

Speed Wiring Products industrial and commercial low-power and signal connector assemblies are available with ratings from 7 A to 13 A and voltages up to 600 V AC. For example, the 2-pole .093 assembly (SKU 823KA8) is rated 10 A at 250 V AC, while the 2-pole MATE-N-LOK assembly (SKU 823KC6) is rated 13 A at 600 V AC. The 12-pole MATE-N-LOK plug (SKU 823KD2) is rated 8 A at 600 V AC. These ratings apply to the connector assembly as a whole, including the pre-attached wire leads. Always verify that the selected assembly meets the specific electrical requirements of your application.

Speed Wiring Products uses several wire types depending on the assembly family. Industrial and commercial low-power and signal assemblies typically use UL 1015 hookup wire with a PVC jacket, in 18 AWG or 16 AWG. Environmentally sealed assemblies use SXL thick-wall cross-linked automotive wire (18 AWG) meeting SAE-J1128. Harsh-environment DC power assemblies use TXL thin-wall cross-linked automotive wire (12 AWG) meeting SAE-J1128. These wire types are chosen for their electrical properties, temperature ratings, and resistance to abrasion and chemicals. The specific wire type and gauge are listed in each product's specifications.

Yes. Speed Wiring Products offers connector assemblies with 2, 4, 6, and 12 poles. For example, the .093 family includes 2-pole (SKU 823KA8), 4-pole (SKU 823KA9), and 6-pole (SKU 823KC1) versions. The MATE-N-LOK family includes 2-pole (SKU 823KC6) and 12-pole (SKU 823KD2) versions. The environmentally sealed MX150L assembly (SKU 823KE2) has 4 poles, and the Deutsch DTP assembly (SKU 823KE0) has 2 poles. Pole count determines the number of independent circuits that can be connected through a single assembly. Select the pole count that matches the number of signal or power lines in your application.

The Deutsch DTP assembly (SKU 823KE0) is a harsh-environment DC power connector rated 25 A at 50 V DC with 2 poles and 12 AWG TXL wire. It is designed for higher-current applications and uses a rugged, environmentally sealed interface. The MX150L assembly (SKU 823KE2) is an environmentally sealed power and signal connector rated 7 A at 50 V DC with 4 poles and 18 AWG SXL wire. It is suited for lower-current power and signal circuits that still require sealing against moisture and contaminants. Both are pre-wired with 48-inch leads, but they differ in current capacity, pole count, and wire gauge. Choose based on the electrical load and number of circuits required.

Speed Wiring Products offers specific families designed for harsh environments. The Deutsch DTP assembly (SKU 823KE0) is rated for harsh-environment DC power connections and uses a sealed connector interface. The MX150L assembly (SKU 823KE2) is environmentally sealed for power and signal applications. These assemblies are constructed with cross-linked automotive wire (TXL or SXL) that resists abrasion, chemicals, and temperature extremes. They are suitable for applications where exposure to moisture, dust, vibration, or temperature variation is expected. For standard industrial environments, the low-power and signal assemblies with UL 1015 wire are typically sufficient. Always review the specific ratings and materials to ensure compatibility with your environment.

Most Speed Wiring Products connector assemblies are supplied with 48-inch wire leads. This includes the .093, .084 Power, MATE-N-LOK, MX150L, and Deutsch DTP families. The 12-pole MATE-N-LOK plug (SKU 823KD2) is an exception, with a 6-inch lead length. Lead length is measured from the connector interface to the end of the wire. If a different length is required, the wires can be trimmed or extended in the field using appropriate splices or terminals. The pre-attached leads are tinned or stripped depending on the assembly, ready for connection to terminal blocks or other wiring.