water_drop

Water Treatment & Utilities

Source water treatment & utilities equipment worldwide. 49,916 products from 12 brands incl. pumps, valves & controls. Buy in stock at 3G Electric.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 1988 of 4992

LITTLE GIANT

LITTLE GIANT High-Capacity Condensate Tank Pump

BrandLITTLE GIANT

Sign inAvailable

BLANCETT

BLANCETT B110-500 Inline Turbine Flow Meter

BrandBLANCETT

Sign inAvailable

GRACO

GRACO FDA-Compliant EODD Pump

BrandGRACO

Sign inAvailable

String-wound water filter cartridge with 100-micron rating for sediment removal. Constructed with cotton filter media, rated for 5 gpm flow. Overall height 9 7/8 inches. Suitable for pre-filtration in water systems to reduce particulate matter.

OEM

OEM APPROVED VENDOR String Wound Water Filter Cartridge

BrandOEM

Sign inAvailable

Brass vacuum saving valve from SMC ZP2V series, rated for -100 kPa vacuum. Features 8 mm hex size and 9 mm overall length. Used in pneumatic vacuum systems to reduce air consumption by shutting off flow when set vacuum is reached, common in pick-and-place and material handling applications.

SMC

SMC ZP2V-A5-05 Vacuum Saving Valve, Brass, -100 kPa, 8 mm Hex, 9 mm Lg

BrandSMC

Sign inAvailable

This 90° threaded pipe elbow connects two 1/4 in pipes in high-pressure potable water systems. Rated for a maximum operating pressure of 1,000 psi, it measures 1 1/4 in in length. Suitable for plumbing applications requiring a directional change.

OEM

OEM Metal Pipe Elbow: 90° Elbow, 1/4 in x 1/4 in, 1,000 psi, 1 1/4 in Lg

BrandOEM

Sign inAvailable

This snap-on pipe marker identifies hot water lines in industrial piping systems. The green and white marker with arrows indicates flow direction and fits pipes with an outer diameter of 3/4 to 1 3/8 inches. It is used for facility safety and compliance with pipe-marking standards.

BRADY

BRADY Hot Water Snap-On Pipe Marker

BrandBRADY

Sign inAvailable

This submersible centrifugal pump features an epoxy-encapsulated construction for corrosion resistance. It operates on 115V AC with a maximum head of 11 ft and has 1/4 in intake and discharge connections. Suitable for circulating or transferring clean water and light fluids in applications such as fountains, aquariums, and small drainage systems.

Dayton

Dayton Epoxy-Encapsulated Submersible Centrifugal Pump

BrandDayton

Sign inAvailable

This non-clog sewage ejector pump is designed for moving wastewater and solids from below-grade plumbing to higher sewer lines. It features a cast iron impeller, handles solids up to 3 inches in diameter, and has a vertical discharge orientation. Rated for 460V AC three-phase power at 5.00 A, it is supplied without a switch.

GOULDS

GOULDS WS1534D4 Non-Clog Sewage Ejector Pump

BrandGOULDS

Sign inAvailable

Three-way, two-position lever-operated valve with spring return. Normally open/normally closed configuration. Maximum flow rate 7.5 scfm. Black finish. Used to direct or block compressed air in pneumatic systems for manual control of actuators and cylinders.

ARO

ARO 200 Series Manual Air Control Valve, 200-C

BrandARO

Sign inAvailable

← Prev 1…1986 1987 1988 1989 1990…4992 Next →

Top brands in Water Treatment & Utilities

Manufacturers serving this application.