water_drop

Water Treatment & Utilities

Source water treatment & utilities equipment worldwide. 49,916 products from 12 brands incl. pumps, valves & controls. Buy in stock at 3G Electric.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 2361 of 4992

REDHAT

REDHAT 2-Way/2-Position Normally Closed Solenoid Valve

BrandREDHAT

Sign inAvailable

Compressed air line lockout valve from the 653 series, designed to isolate pneumatic systems for maintenance or emergency shutdown. Features a 1-inch flange outlet, maximum operating pressure of 17 bar, and maximum operating temperature of 50°C. Suitable for industrial compressed air lines requiring lockout/tagout procedures.

NUMATICS

NUMATICS 653 Series Compressed Air Line Lockout Valve

BrandNUMATICS

Sign inAvailable

Brass sweat-type manual balancing valve with a flow range of 4 to 13 gpm and a minimum flow rate of 4 gpm. Accuracy of ±3% enables precise flow regulation in hydronic heating and cooling systems for balanced distribution across loops.

NUTECH

NUTECH MB2E-2B-100S-100S Manual Balancing Valve, Sweat, Brass, 4-13 gpm

BrandNUTECH

Sign inAvailable

This bleed valve assembly features a PVC body for corrosion resistance. It has a 1/2 in tube inlet and a 1/2 in tube discharge. Commonly used in chemical metering and dosing systems to relieve trapped air or gas from fluid-handling lines.

PULSAFEEDER

PULSAFEEDER J30515 Bleed Valve Assembly

BrandPULSAFEEDER

Sign inAvailable

General service float valve assembly for automatic water level control in tanks, reservoirs, and cooling towers. Features an angle bronze valve body with female NPT connections on both inlet and outlet, adjustable arm, and includes a cylindrical float and rod with 1/4" NPT rod thread. Designed for horizontal piping, delivers 50 gpm at 60 psi.

OEM

OEM APPROVED VENDOR AHF75 Float Valve Assembly

BrandOEM

Sign inAvailable

Stainless steel press tee fitting with EPDM seal for potable water systems. Creates a branch connection in 2 in x 2 in x 1 in pipe runs. Designed for crimp installation.

VIEGA MEGAPRESS

VIEGA MEGAPRESS Crimp Tee Fitting: 2 in x 2 in x 1 in, EPDM

BrandVIEGA MEGAPRESS

Sign inAvailable

This ductile iron inline swing check valve features a standard inline valve body for 12-inch pipe size. It is used in water and wastewater systems to prevent reverse flow, suitable for municipal, industrial, and commercial piping applications where reliable backflow prevention is required.

VAL-MATIC

VAL-MATIC 512ABFK Ductile Iron Inline Swing Check Valve, 12 in

BrandVAL-MATIC

Sign inAvailable

This PVC water suction and discharge hose assembly features a 1 in inside diameter with 1 in x 1 in fittings. It is rated for 90 psi and operates in temperatures from -40° to 150°F. The blue hose includes PVC helix reinforcement for flexibility and crush resistance, suitable for transferring water in industrial, agricultural, and construction applications.

KURIYAMA

KURIYAMA PVC Water Suction & Discharge Hose Assembly with PVC

BrandKURIYAMA

Sign inAvailable

BLANCETT

BLANCETT Turbine Flowmeter Repair Kit B251-102 for B110-375/B110-375-1/2

BrandBLANCETT

Sign inAvailable

This 2-way, 2-position normally closed solenoid valve features a poppet design and water-resistant coil enclosure for outdoor use. It operates on 24V AC and has a 3/8 in pipe size. Suitable for on/off control of liquids and gases in industrial systems where moisture exposure is a concern.

SPARTAN SCIENTIFIC

SPARTAN SCIENTIFIC 2-Way Normally Closed Solenoid Valve

BrandSPARTAN SCIENTIFIC

Sign inAvailable

← Prev 1…2359 2360 2361 2362 2363…4992 Next →

Top brands in Water Treatment & Utilities

Manufacturers serving this application.