water_drop

Water Treatment & Utilities

Source water treatment & utilities equipment worldwide. 49,916 products from 12 brands incl. pumps, valves & controls. Buy in stock at 3G Electric.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 2384 of 4992

This manual two-way ball valve features a straight valve body and lever handle, constructed from 316 stainless steel for corrosion resistance. It provides reliable on/off flow control in industrial piping systems handling corrosive or high-purity fluids.

OEM

OEM APPROVED VENDOR 1 1/2 in 316 Stainless Steel Ball Valve

BrandOEM

Sign inAvailable

This cordset features two DIN Form BI female right-angle connectors with bare wire termination, suitable for connecting solenoid valves in industrial automation and process control systems. It has a 10 m cable length, 18 AWG wire size, gray PUR jacket, and 100 mm DIN connector spacing. Rated IP67 for protection against dust and water ingress.

MURRELEKTRONIK

MURRELEKTRONIK Double-Valve DIN Form Industrial B Solenoid

BrandMURRELEKTRONIK

Sign inAvailable

This straight bronze ball valve features a locking lever handle and is designed for on/off flow control in commercial and industrial piping systems. It has a 1/2 in size, press x MGHT connections, and includes a dust cap with chain. Suitable for water and HVAC applications.

VIEGA PROPRESS

VIEGA PROPRESS Bronze Ball Valve with Dust Cap & Chain, 1/2 in, Press x MGHT

BrandVIEGA PROPRESS

Sign inAvailable

This bronze impeller is designed for use in turbine pumps. It is compatible with manufacturer model numbers 4JPF4A and 53EC03, and is intended for moving water or other fluids in industrial pumping applications.

Dayton

Dayton Bronze Impeller for Turbine Pumps, PPL2225BG

BrandDayton

Sign inAvailable

Round brass blank valve tags, 1 1/8 in diameter and 0.04 in thick, sold in a 100-pack. Suitable for permanent identification and labeling of valves in industrial piping systems. Can be engraved or stamped with custom markings.

C.H. HANSON

C.H. HANSON General Purpose Blank Valve Tags, Brass, 1 1/8 in

BrandC.H. HANSON

Sign inAvailable

Pre-treatment cartridge for tap water feed sources. Removes chlorine and particles from incoming water to protect downstream purification equipment.

ELGA

ELGA Pre-Treatment Cartridge LC177

BrandELGA

Sign inAvailable

Steel valve core torque tool with pre-set minor torque setting for consistent tightening. Overall length 4 13/16 inches. Used for installing valve cores in tire valves to prevent over-torquing and leaks.

WESTWARD

WESTWARD Valve Core Torque Tool

BrandWESTWARD

Sign inAvailable

Straight-body stainless steel ball valve with compression x compression end connections and locking lever handle. Used for on/off flow control in industrial fluid systems. Suitable for high-purity gas and liquid applications.

HAM-LET

HAM-LET Straight-Body Stainless Steel Ball Valve

BrandHAM-LET

Sign inAvailable

This flange gasket is a replacement seal for flanged connections on water heaters used in hot water and steam system boilers. It prevents leaks at the joint between the tank and piping.

TELEDYNE LAARS

TELEDYNE LAARS Flange Gasket S0063700 for Water Heater

BrandTELEDYNE LAARS

Sign inAvailable

Green wrap-around pipe marker with white 'Plant Water' legend and directional arrows. Fits pipe outer diameters from 1/2 to 1-3/8 inches. Used for identifying plant water lines in industrial piping systems.

BRADY

BRADY Plant Water Wrap-Around Pipe Marker 5739-O

BrandBRADY

Sign inAvailable

← Prev 1…2382 2383 2384 2385 2386…4992 Next →

Top brands in Water Treatment & Utilities

Manufacturers serving this application.