water_drop

Water Treatment & Utilities

Source water treatment & utilities equipment worldwide. 49,916 products from 12 brands incl. pumps, valves & controls. Buy in stock at 3G Electric.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 2651 of 4992

This PVC bulk hose is designed for potable water discharge applications. It features yarn reinforcement for strength and operates within a temperature range of 25° to 150°F. The hose has a 1-inch inside diameter, 10-foot length, and a working pressure of 125 psi. Its grey color is typical for water discharge hoses.

KURIYAMA

KURIYAMA PVC Bulk Potable Water Discharge Hose with Yarn Reinforcement

BrandKURIYAMA

Sign inAvailable

This reciprocating piston compressor/vacuum pump operates on 115V AC, single-phase power, delivering a maximum continuous pressure of 50 psi and a flow rate of 1.25 cfm. It is suited for pneumatic control systems, air-operated tools, and light industrial applications requiring clean, oil-free air.

GAST

GAST 1LAA-55S-M100GX Reciprocating Piston Compressor/Vacuum Pump

BrandGAST

Sign inAvailable

This access valve provides a service port for refrigerant system maintenance, charging, and pressure testing. It is installed on commercial and industrial refrigeration, air conditioning, and heat pump systems to enable safe access for technicians.

CARRIER

CARRIER Access Valve 06DA660065

BrandCARRIER

Sign inAvailable

Plunger-actuated manual air control valve with 5 ports and 1/4 in BSPT connections. Rated for maximum operating pressure of 0.9 MPa. Used to direct compressed air flow in pneumatic systems for industrial automation, packaging, and material handling circuits.

SMC

SMC VFM350-02-05 VFM Series Manual Air Control Valve

BrandSMC

Sign inAvailable

This rotary-crank drum pump features an aluminum housing and Buna-N seals, delivering 28.8 oz per stroke. It is a pump-only unit designed for manual fluid transfer from drums or barrels in industrial maintenance and manufacturing settings.

Dayton

Dayton Rotary-Crank Drum Pump

BrandDayton

Sign inAvailable

Green pipe marker with white legend reading 'Storm Water' and directional arrows. Fits pipe outer diameters of 4 to 6 inches. Used to identify storm water lines in industrial piping systems for safety and compliance.

BRADY

BRADY Storm Water Snap-On Pipe Marker

BrandBRADY

Sign inAvailable

This single-phase sewage grinder pump is rated at 240V AC and delivers 3 hp with a flow of 93 gpm at 10 feet of head. It features a 2-1/2 inch flange connection and is CUS listed. The pump grinds solids into slurry for pumping through small-diameter pipes in wastewater systems. Switch is not included.

Dayton

Dayton General Purpose Sewage Grinder Pump

BrandDayton

Sign inAvailable

This 1-inch bronze gate valve features a non-rising stem design, bronze wedge and bonnet, and FNPT x FNPT connections. Rated for 200 psi CWP, it is used for on/off flow control in general-purpose piping systems handling water, oil, or gas.

MILWAUKEE VALVE

MILWAUKEE VALVE 1" Non-Rising Stem Bronze General Purpose Gate Valve

BrandMILWAUKEE VALVE

Sign inAvailable

RHEEM

RHEEM Triton GHE100SU-160 Powered-Vent Commercial Gas Water Heater

BrandRHEEM

Sign inAvailable

Dial pressure gauge with 4 in dial, 0 to 15 psi range, ±1.00% accuracy. 304 stainless steel case, glycerin-filled case dampens vibration. 316 stainless steel wetted parts and Mini-Seal lower housing with mineral oil seal fill. Suitable for measuring pressure in systems with corrosive media or where vibration dampening is needed.

KODIAK CONTROLS

KODIAK CONTROLS 4 in Dial Pressure Gauge with 316 SS Mini-Seal

BrandKODIAK CONTROLS

Sign inAvailable

← Prev 1…2649 2650 2651 2652 2653…4992 Next →

Top brands in Water Treatment & Utilities

Manufacturers serving this application.