water_drop

Water Treatment & Utilities

Source water treatment & utilities equipment worldwide. 49,916 products from 12 brands incl. pumps, valves & controls. Buy in stock at 3G Electric.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 4684 of 4992

This horizontal-mount gas engine direct-drive pressure washer pump features a triplex piston design with oil bath lubrication. It delivers a maximum flow rate of 3.5 gpm at 1750 RPM, with a solid shaft and horizontal gas engine flange. Connections include NPT discharge and FNPT intake. Suitable for pressure washing systems powered by a horizontal gas engine.

A.R. NORTH AMERICA

A.R. NORTH AMERICA Horizontal-Mount Gas Engine Direct-Drive

BrandA.R. NORTH AMERICA

Sign inAvailable

Double pilot-operated check valve with D03 NFPA mounting pattern. Maximum pressure rating of 5,075 psi. Used in hydraulic systems to block flow in one direction while allowing free flow in the opposite direction when pilot pressure is applied, commonly in load holding and controlled motion circuits.

Parker

Parker CPOM2DDN Double Pilot-Operated Check Valve, D03 NFPA, 5075 psi

BrandParker

Sign inAvailable

Danfoss

Danfoss 032F3298 Refrigerant Solenoid Valve

BrandDanfoss

Sign inAvailable

Drain valve kit for use in compressed air systems and filtration equipment. Designed to replace or repair automatic drains for condensate and contaminant removal.

Parker

Parker Drain Kit EM1

BrandParker

Sign inAvailable

This high-precision metering pump uses a stepper motor drive for accurate flow control. It features a PVDF head, PTFE diaphragm, and FKM seals, operating on 115/230V AC. The pump is suited for precise chemical dosing in water treatment and industrial processes.

NEXTSTEP

NEXTSTEP NS4AMAKVVT1XXX High-Precision Stepper Motor-Driven

BrandNEXTSTEP

Sign inAvailable

Progressive cavity pump with wobble stator design, driven by a direct-drive AC motor. Constructed with a cast iron body, Buna-N elastomers, and a stainless steel rotor. Suitable for water and low-viscosity fluids in industrial transfer, wastewater treatment, and process applications requiring steady, non-pulsating flow.

MOYNO

MOYNO Wobble Stator PC Pump with Motor

BrandMOYNO

Sign inAvailable

Orange polypropylene bag filled with polymer that expands on contact with fresh water to form a temporary barrier. Measures 2-1/2 in high, 24 in wide, and 48 in long. Used for indoor flood control during leaks or water intrusion.

QUICK DAM

QUICK DAM WUGG4-25 Water-Activated Indoor Flood Barrier

BrandQUICK DAM

Sign inAvailable

This valve core remover is constructed with a stainless steel body and includes an extractor rod. It features a 1/4 in Female UNF Right-Hand connection for use in charging applications. The tool is designed for removing and installing valve cores in refrigeration systems to access the refrigerant circuit for service or evacuation.

UNIWELD

UNIWELD Valve Core Remover

BrandUNIWELD

Sign inAvailable

Dayton

Dayton Shaft Seal and Gasket Assembly

BrandDayton

Sign inAvailable

This non-clog sewage ejector pump is constructed with a cast-iron housing and a ductile iron impeller. It operates on 208 to 230V AC three-phase power, delivering 10 hp. The pump features a 4-inch flange and a horizontal discharge orientation. Switch is not included. Typical applications include moving wastewater and solids from below-grade plumbing fixtures to higher-level sewer lines in commercial and industrial settings.

FRANKLIN ELECTRIC

FRANKLIN ELECTRIC 4NCH-10023P3 Non-Clog Sewage Ejector Pump

BrandFRANKLIN ELECTRIC

Sign inAvailable

← Prev 1…4682 4683 4684 4685 4686…4992 Next →

Top brands in Water Treatment & Utilities

Manufacturers serving this application.