Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

build

Welding

Welding equipment & consumables — MIG/TIG/stick machines, electrodes, wire, PPE and accessories for fabrication and maintenance.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 496 of 501

Bridge cam gauge for measuring 45° angles on weld preparations and finished welds. Displays measurements in inches with 1/16 in increments. Unit of measure increments: 1 mm and 1/16 in. Used in weld inspection to verify weld geometry.

INSIZE Bridge Cam Gauge 4835-1

BrandINSIZE

Sign inAvailable

Chisel-shaped soldering tip with 1.57 mm width, part of the ET Series. Designed for use with the WEP 70 handpiece. Suitable for general-purpose soldering on electronic assemblies and small components, including through-hole and surface-mount work.

WELLER ET Series Soldering Tip, Chisel, 1.57 mm, ETA-5

BrandWELLER

Sign inAvailable

Threaded gas diffuser designed for BERNARD, Miller, and Hobart MIG guns including BTB, Clean Air, Dura-Flux, FILTAIR, and Q-/S-/W-Gun models. Compatible with Centerfire contact tip series. Directs shielding gas evenly around the weld puddle during MIG welding.

BERNARD Gas Diffuser DS-1 for Centerfire Contact Tips

BrandBERNARD

Sign inAvailable

The HAKKO FR301-03/P is a 140 W desoldering gun with a round tip, designed for removing solder from through-hole components in electronics repair, rework, and prototyping. It is not ESD safe.

HAKKO FR301-03/P Desoldering Gun, 140 W, Round Tip

BrandHAKKO

Sign inAvailable

General purpose cutting tip for handheld torches using propylene fuel. Size 00 with 1/4 in connection. Suitable for cutting steel in maintenance, fabrication, and repair tasks.

VICTOR 0333-0261 General Purpose Cutting Tip

BrandVICTOR

Sign inAvailable

The THERMAL DYNAMICS Cutmaster 40 is a 40 A plasma cutter with a 15 ft handheld torch, operating on a nominal input voltage of 240V and requiring a minimum input air flow rate of 2.8 cfm. This unit is used for cutting conductive metals in fabrication, maintenance, and on-site construction applications.

THERMAL DYNAMICS

THERMAL DYNAMICS Cutmaster 40 Plasma Cutter, 40 A, 15 ft Handheld Torch

BrandTHERMAL DYNAMICS

Sign inAvailable

This DC multiprocess welder supports MIG, Stick, and TIG welding processes. It delivers a maximum amperage of 250 A for both Stick and TIG on a 230V nominal input. The unit is configured as a MIG/Stick Pack with running gear, suitable for fabrication, maintenance, and repair applications.

ESAB Rebel EMP 235ic DC Multiprocess Welder

BrandESAB

Sign inAvailable

Carbon steel electrode for high-deposition welding. E6022 classification, 1/8 in diameter, 14 in length, 50 lb package. Tensile strength as welded: 60 to 82 ksi. Used for general fabrication, structural welding, and repair work requiring fast fill and high productivity.

LINCOLN ELECTRIC

LINCOLN ELECTRIC E6022 Fleetweld 22 Stick Electrode, 1/8 in x 14 in, 50 lb

BrandLINCOLN ELECTRIC

Sign inAvailable

Torch-mount flashback arrestor set for oxygen and fuel service. Prevents reverse gas flow and stops flashbacks in oxy-fuel cutting and welding systems. Connection size 9/16"-18 with CGA 022 (Oxygen) fitting.

VICTOR Flashback Arrestor Set, CGA 022 (Oxygen), 9/16"-18

BrandVICTOR

Sign inAvailable

This wall-mount welding fume exhauster arm measures 84 inches in length and 4 inches in diameter. It is designed for use with the EXTRACT-ALL extractor series to capture and remove airborne contaminants at the source in industrial welding environments.

EXTRACT-ALL Wall-Mount Welding Fume Exhauster Arm, 84 in L, 4 in Dia, EA74

BrandEXTRACT-ALL

Sign inAvailable

← Prev 1…494 495 496 497 498…501 Next →