CANTEX 45° Conduit Elbow
The CANTEX 45° Conduit Elbow (MPN 5121004) is a Schedule 80 PVC fitting with a 3/4 in trade size and 3 1/2 in overall length. 3G Electric interprets your demand for this specific electrical component, sourcing it…
SKU 3G-OTH-806152
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The CANTEX 45° Conduit Elbow (MPN 5121004) is a Schedule 80 PVC fitting with a 3/4 in trade size and 3 1/2 in overall length. 3G Electric interprets your demand for this specific electrical component, sourcing it alongside genuine industrial equipment across 14 departments — with specialist depth in controls and electrical distribution from brands like Schneider and ABB.
Frequently Asked Questions
What is the CANTEX 45° Conduit Elbow used for?
The CANTEX 45° Conduit Elbow (MPN 5121004) is used to change the direction of electrical conduit runs by 45 degrees in industrial and commercial wiring systems. It protects and routes electrical cables within PVC Schedule 80 conduit, suitable for above-ground or underground applications where mechanical strength is required.
What are the specifications of the CANTEX 45° Conduit Elbow?
This CANTEX 45° Conduit Elbow (MPN 5121004) is a Schedule 80 PVC fitting with a 3/4 in trade size and 3 1/2 in overall length. It is designed for 45-degree directional changes in conduit systems, offering high impact resistance and corrosion protection for electrical wiring in demanding environments.
Where to buy the CANTEX 45° Conduit Elbow worldwide?
3G Electric supplies the CANTEX 45° Conduit Elbow (MPN 5121004) to customers worldwide. We handle full logistics, customs clearance, and delivery for this PVC fitting, sourcing it alongside genuine industrial equipment across 14 departments — including electrical distribution from brands like Schneider and ABB.
How to install a CANTEX 45° Conduit Elbow?
To install the CANTEX 45° Conduit Elbow, apply PVC solvent cement to the inside of the fitting and the outside of the conduit end. Insert the conduit fully, rotate slightly to distribute cement, and hold for 30 seconds. Allow proper cure time per manufacturer instructions before pulling wires.
Used in
Common applications for CANTEXCANTEX Products
3G Electric supplies CANTEX 45° conduit elbows. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
