Dayton Heat Slinger, Aluminum, Aluminum Plated, 8 in OD, 1 15/16 in Bore
The Dayton Heat Slinger (SKU 3G-OTH-74489) is an aluminum heat slinger with an aluminum-plated finish, designed for use with the 3C540 model. It features an 8-inch outside diameter and a 1 15/16-inch bore diameter…
SKU 3G-OTH-74489
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Dayton Heat Slinger (SKU 3G-OTH-74489) is an aluminum heat slinger with an aluminum-plated finish, designed for use with the 3C540 model. It features an 8-inch outside diameter and a 1 15/16-inch bore diameter. This component is compatible with Part Number 3C540.
Frequently Asked Questions
What is a Dayton Heat Slinger used for?
A Dayton Heat Slinger is a component used in industrial heating equipment to dissipate heat from rotating shafts. It is designed for use with the model, helping to protect bearings and extend equipment life in high-temperature environments.
What are the specifications of the Dayton Heat Slinger ?
The Dayton Heat Slinger has an 8 in outside diameter and a 1 15/16 in bore diameter. It is made of aluminum with an aluminum-plated finish. This component is compatible with Part Number and is designed for use with the model.
Where to buy a Dayton Heat Slinger worldwide?
You can source the Dayton Heat Slinger through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide locations. Contact us for availability and lead time.
How to install a Dayton Heat Slinger?
To install a Dayton Heat Slinger, ensure the shaft is clean and free of debris. Slide the heat slinger onto the shaft with the bore facing the bearing. Secure it according to the equipment manufacturer's guidelines. Always follow generic best practices for component installation to avoid damage.
Used in
Common applications for DaytonDayton Products
3G Electric supplies Dayton heat slingers. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- B-LINE BY EATON Steel beam clamp with zinc-plated finish, designed for beam flanges 1/8 in to 1/4 in thick. Features a 3/8"-16 threaded stud, 1 in overall length, and hammer-on mounting for use with 4 in square boxes. UL/CUL listed with 160 lb load capacity
- NVENT CADDY Steel beam mount for securing EMT conduit, pipe, and cable to steel beam flanges. Features a corrosion-resistant coated finish, hammer-on mounting, and 360° rotation. Supports loads up to 75 lb, fits beam flanges 5/16 in to 1/2 in thick, and accommodates 1/2 in and 3/4 in trade size EMT conduit
- NVENT CADDY Steel beam mount with corrosion-resistant gray finish. Hammer-on mounting style for beam flanges 1/8 in to 1/4 in thick. Supports 75 lb load capacity and rotates 360°. Compatible with 1 in EMT conduit and cables with OD from 1.18 in to 1.38 in. Used to secure conduit, pipe, or cable to steel beams in electrical and mechanical installations