Fireye Pressure Transmitter. The PXMS-K Series pressure transmitters

[{"filename":"133-761-Pressure_Transmitter_PXMS-K_English_2013-02-08.pdf","text":"\n\n\n 133-761\n FEBRUARY 8, 2013\n\n\n\n 3G-OTH-02826\n Pressure Transmitter\n Installation Instructions\n PXMS-15K, 60K, 200K, 300K, 400K\n\nDESCRIPTION\n The 3G-OTH-02826 Series pressure transmitters (e.g. PXMS-200K) are state-of-the-art instruments pro-\n viding 4-20 mA output. Each Piezoresistive Pressure Transmitter contains a transducer comprised of\n a piezoresistive silicon chip mounted on a glass-metal feedthrough header welded into a stainless\n steel housing and filled with silicone oil; the very thin laser-welded stainless steel isolation-dia-\n phragm completes the front side. Media pressure is transferred from the stainless steel isolation-dia-\n phragm, via the oil inside the cell, to the silicon measuring chip. This construction, combined with\n the advanced internal signal conditioning circuitry, results in a rugged instrument with extremely\n small temperature error and class-leading EMI/RFI resistance.\n\n The enclosure and all wetted parts are made of 316L stainless steel to meet NACE MR01-75.\n\n\n Specifications\n Operating Pressure Range: See the part number matrix Vibration Resistance: 20G per IEC 60068-2-6 (Vibration\n on the reverse side. under resonance)\n Operating Temperature: -40 to 180°F (-40 to 82°C). Wiring Protection: Protected against reverse polarity\n Compensated Temperature Range: -20 to 160°F and short circuit, 48 VDC Maximum\n (-29 to 71°C). Supply Voltage: 8 - 30 VDC (Typically 24 VDC)\n Physical Characteristics: Transmitter Output: 4-20mA, two wire configurations\n Process Connection: 1/4 NPT female with 7/8” Hex with load characteristics\n Nut. Insulation: Greater than 10M? @ 300 VDC\n Electrical Connection: 1/2” NPT Male\n Conduit connection with 60” long cable, vented Electromagnetic Compatibility (EMC): Standards; EN\n Enclosure: NEMA 4/IP65 or better 61000-6-2:2005, EN 61000-6-3:2007, EN 61326-2-\n Body: 316L Stainless Steel. Meets NACE MR01-75. 3:2006\n Wetted Parts: 316L stainless steel Voltage Surge/Spike Protection: Protection against a\n Environmental Effect (Humidity): No effect for 0-95%, 600 Volt spike per IEC 60-2\n Non-condensing Shipping Weight: 6.5 ounces\n Mounting: Transmitter can be installed in any axis. Applicable Standards:\n Transmitter position has negligible affect on perfor- NACE MR0175 Compliant with the requirements\n mance as long as it is perpendicular to the flow being CSA (c/us): Class I / II / III, Div 1, Groups A-F T4\n monitored. Class I / II / III, Div 2, Groups A-D, F, G T4\n Shock Resistance: 1000g per IEC 60068-2-6 ATEX: IBExU 10 ATEX 1124 X\n (Mechanical Shock) II 1G Ex ia IIC T6-T4\n II 3G Ex nA IIC T6\n\n Product Dimensions 3G-OTH-02826 Series\n\n\n\n\n 1\n\f \n\n\n\n Operating Range How to Order\n Supply voltage for the 3G-OTH-02826 must be within 3G-OTH-02826 Model Number Matrix\n range of 8-30 VDC. The graph below shows the 3G-OTH-02826 two wire pressure transmitter with flying\n minimum supply voltage (VDC) required for a lead connection, 15-400 psig range, 4-20 mAdc output.\n given load resistance (R).\n Model Number:\n\n K\n\n\n\n\n PXMS and 3G-OTH-02826 Series Pressure Transmitter Cabling Identification\n The PXMS Series Pressure Transmitters have been changed. Previous pressure transmitters in this\n series were identified as PXMS Pressure transmitters (e.g. PXMS-200). The newest version is the\n 3G-OTH-02826 Series Pressure Transmitters (e.g. PXMS-200K).\n IDENTIFICATION OF ELECTRICAL CABLE COLOR IS NOT INTERCHANGEABLE\n BETWEEN THE TWO SERIES OF PRESSURE TRANSMITTERS.\n This document contains information to assist you in identifying the pressure transmitter unit you\n have and the correct electrical cable colors to avoid wiring mistakes.\n PXMS Series (e.g. PXMS-200) 3G-OTH-02826 Series (e.g. PXMS-200K)\n\n\n\n\n Indentations on the\n hex coupling for\n controlled locking. No step-down between\n the body and the hex\n Product has a step-down coupling.\n between the transmitter No indentations on the\n body and hex coupling. hex coupling.\n\n Cable Color Connection Cable Color Connection\n Red Power Red Power\n Blue Signal Blue N/A\n Black Case Ground Black Signal\n Orange, Yellow, N/A Orange, Yellow, N/A\n White White\n Installation 00-02-0475 Installation 00-02-0840\n Instructions Manual\n Installation 05-08-0754 Installation 05-08-0763\n Diagram Diagram\n\n\n2"}]