OEM Heating cord with thermostat 1m 40W/m
The OEM Heating cord with thermostat 1m 40W/m (SKU 3G-CBM-01071) is a silicone-insulated anti-freeze heating cable with a bimetal thermostat set at +3°C ± 3°C and +8°C ± 3°C, designed to protect pipes and prevent…
SKU 3G-CBM-01071
Also listed as: 40 WM · 40-WM
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The OEM Heating cord with thermostat 1m 40W/m (SKU 3G-CBM-01071) is a silicone-insulated anti-freeze heating cable with a bimetal thermostat set at +3°C ± 3°C and +8°C ± 3°C, designed to protect pipes and prevent freezing in refrigeration and hydraulic systems. It operates at 220/240V with a power output of 40 W/m, a heating section length of 1000 mm, a cold section length of 1000 mm, and a total length of 2000 mm; the outer diameter is 5.5 mm ± 0.2 mm. The cable is supplied pre-cut to length and ready for use, and the length cannot be shortened by the end user. Manufactured and tested to EN60335 and compliant with Directive 2014/35/UE, with CE certification available.
Frequently Asked Questions
What is the OEM heating cord with thermostat 1m 40W/m used for?
It is a self-regulating freeze-protection heating cord for pipes and refrigeration or hydraulic equipment. The integrated bimetal thermostat switches the circuit on only below the setpoint, saving energy. The 40 W/m rating is recommended for plastic pipe installations.
What are the specifications of the OEM heating cord 40WM?
The OEM 40WM cord delivers 40 W/m at 220/240V with a 1000 mm heating section and 1000 mm cold lead (2000 mm total), 5.5 mm ± 0.2 mm outer diameter, silicone insulation, 15 mm minimum bend radius, and a thermostat setpoint of +3°C ± 3°C to +8°C ± 3°C. It is built and tested to EN60335 and complies with the 2014/35/EU directive.
Can the OEM heating cord 40WM be shortened or installed on site?
No — the cord is supplied pre-cut to length and ready to use, and the end user cannot shorten the cable. Install it within the 15 mm minimum bend radius and the -40°C to +130°C service temperature range. The thermostat is isolated with a heat-shrink sleeve; the red marking shows where the cold section begins.
Used in
Common applications for OEMOEM Products
3G Electric supplies OEM hvac & refrigeration. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
