PARKER Standard Brass Inverted Flare Tube Fittings Elbow 259IFHD-3-2
The Parker Standard Brass Inverted Flare Tube Fittings Flared Fitting Elbow (MPN 259IFHD-3-2) is a flared/threaded brass fitting with a 3/16 in OD x 1/8 in pipe fitting size, supplied in a 10-pack. It is UL Listed…
SKU 3G-OTH-655596
Also listed as: 259IFHD32 · 259IFHD 3 2
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Parker Standard Brass Inverted Flare Tube Fittings Flared Fitting Elbow (MPN 259IFHD-3-2) is a flared/threaded brass fitting with a 3/16 in OD x 1/8 in pipe fitting size, supplied in a 10-pack. It is UL Listed and features a 3/8"-24 thread size A. 3G Electric interprets demand and delivers this genuine industrial fitting across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Frequently Asked Questions
What is the Parker 259IFHD-3-2 flared fitting elbow used for?
The Parker 259IFHD-3-2 is a brass inverted flare tube fitting elbow used to connect 3/16 in OD tubing to a 1/8 in pipe thread port in hydraulic, pneumatic, and instrumentation systems. It provides a leak-resistant seal in fuel, oil, and refrigerant lines across industrial applications.
What are the specifications of the Parker 259IFHD-3-2 fitting?
This Parker flared fitting elbow has a 3/16 in OD tube size and 1/8 in pipe fitting size, with a 3/8"-24 thread size A. It is made of brass, comes in a 10-pack, and is UL Listed. The MPN is 259IFHD-3-2.
Where to buy Parker 259IFHD-3-2 fittings worldwide?
3G Electric supplies the Parker 259IFHD-3-2 flared fitting elbow worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider across 14 departments, we source genuine Parker fittings and support your procurement needs.
How to install a Parker inverted flare fitting elbow?
To install a Parker inverted flare fitting, first cut the tubing square and deburr. Slide the nut and sleeve onto the tube, then flare the end using a proper flaring tool. Tighten the nut onto the fitting body with two wrenches—one on the body, one on the nut—until snug. Avoid overtightening to prevent thread damage.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard brass inverted flare tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
