PARKER Standard Brass Inverted Flare Tube Fitting Union
The Parker 42IFHD-4 is a standard brass inverted flare tube fitting union, sized 1/4 in OD x 1/4 in OD, with a flared type and 7/16"-24 thread size A. Supplied in a 10-pack, it meets SAE J512 standards for reliable…
SKU 3G-OTH-655584
Also listed as: 42IFHD4 · 42IFHD 4
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Parker 42IFHD-4 is a standard brass inverted flare tube fitting union, sized 1/4 in OD x 1/4 in OD, with a flared type and 7/16"-24 thread size A. Supplied in a 10-pack, it meets SAE J512 standards for reliable connections in industrial fluid systems.
Frequently Asked Questions
What is the Parker 42IFHD-4 flared fitting union used for?
The Parker 42IFHD-4 is a standard brass inverted flare tube fitting union used to connect two 1/4 in OD tubes in industrial fluid systems. It provides a leak-resistant, flared seal for hydraulic, pneumatic, and fuel lines, meeting SAE J512 standards for reliable performance.
What are the specifications of the Parker 42IFHD-4?
The Parker 42IFHD-4 is a brass inverted flare union with 1/4 in OD x 1/4 in OD fitting size, flared type, and 7/16"-24 thread size A. It is supplied in a 10-pack and complies with SAE J512 standards for industrial fluid connections.
Where to buy Parker 42IFHD-4 flared fitting union worldwide?
3G Electric supplies the Parker 42IFHD-4 flared fitting union worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to order this SAE J512-compliant brass union for your fluid systems.
How to install a Parker inverted flare fitting union?
To install the Parker 42IFHD-4, ensure tube ends are clean and properly flared to 45 degrees. Apply thread sealant to the male threads, hand-tighten the union, then use a wrench to tighten 1/4 turn past hand-tight. Avoid over-tightening to prevent brass damage. Always follow SAE J512 guidelines.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard brass inverted flare tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
