SIT Thermocouple Sit INT.600 9x1 0270408
Sit Thermocouple Sit INT.600 9x1 0270408
SKU 3G-CBM-00509
Also listed as: INT 600 · INT-600
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
Sit Thermocouple Sit INT.600 9x1 0270408
Frequently Asked Questions
What is the SIT thermocouple INT.600 9x1 0270408 used for?
The SIT thermocouple INT.600 9x1 0270408 is a gas safety component used in gas-fired appliances such as boilers, water heaters, and cookers. It detects the pilot flame and generates a millivolt signal to keep the gas valve open, shutting off gas if the flame is lost.
What are the specifications of the SIT thermocouple INT.600 9x1 0270408?
The SIT thermocouple INT.600 9x1 0270408 has a 600 mm length and a 9 mm diameter connection. It is a standard replacement part for SIT gas controls. For exact technical data, refer to the manufacturer's datasheet.
Where to buy the SIT thermocouple INT.600 9x1 0270408 in Singapore?
You can source the SIT thermocouple INT.600 9x1 0270408 through 3G Electric in Singapore. We handle logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this SIT gas control component.
How to install the SIT thermocouple INT.600 9x1 0270408?
Install the SIT thermocouple by inserting the probe into the pilot flame bracket and tightening the nut to the gas valve. Ensure the tip is fully in the flame. Use a multimeter to verify millivolt output. Always follow the appliance manufacturer's instructions and shut off gas before work.
Used in
Common applications for SITSIT Products
3G Electric supplies SIT gas controls. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- SMC Pneumatic position sensor for detecting cylinder piston position in industrial automation systems. Rated for 1000 V AC with IP40/IP67 protection against dust and water ingress. Includes a 0.5 m lead length for connection
- SMC Amplifier for pneumatic position sensors, NPN output, rated for 28 V DC or less. IP40/IP67 protection, 0.5 m lead length. Used in industrial automation to detect cylinder piston positions and provide output signals to controllers
- SMC This pneumatic position sensor features a direct mount, round groove design for non-contact detection of actuator piston position. Rated IP67, it operates at 28 V or less and is suitable for use in industrial automation systems such as manufacturing, packaging, and material handling equipment
