bolt

Electrical & Automation

Industrial electrical & automation components — circuit protection, contactors, relays, PLCs, drives and controls from trusted brands for Singapore industry.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 119 of 6105

Enclosed non-reversing starter for three-phase motor control. Features NEMA Size 0, 18 A rating, 3 poles, 24V AC coil, electronic overload, screw terminals, pilot light, and two 1NO auxiliary contacts. Suitable for starting and protecting motors in industrial applications such as pumps, fans, and conveyors.

SIEMENS NEMA

SIEMENS NEMA Enclosed Non-Reversing Starter with Electronic Overload

BrandSIEMENS NEMA

Sign inAvailable

This screw-mount slotted wiring duct base is designed for routing and protecting electrical wires in control panels and enclosures. Made of white PVC, it features a narrow slot wall type and is compatible with snap-on covers. Dimensions: 72 in length, 3 in nominal height, 2.2 in slot height, 0.2 in slot width.

THOMAS & BETTS

THOMAS & BETTS TYD2X3NPW6 Screw-Mount Slotted Wiring Duct Base

BrandTHOMAS & BETTS

Sign inAvailable

Non-illuminated selector switch with a short-handled polycarbonate knob and metallic bezel. Provides three maintained positions (On-Off-On) with 2 normally open contacts. Rated AC 1.5 A at 230 V and DC 3 A at 24 V. Suitable for panel mounting in industrial control applications requiring manual selection of operating modes.

EATON

EATON C22-WRK3-K20 Selector Switch

BrandEATON

Sign inAvailable

Steel nipple for connecting sections of dust-tight wireways in electrical installations. Measures 4 inches wide, 4 inches high, and 2 inches long. Includes a set of screws to join sections and a gasket to maintain dust-tight integrity. No knockouts.

HOFFMAN

HOFFMAN F44LN2 Steel Nipple for Dust-Tight Wireways

BrandHOFFMAN

Sign inAvailable

This building wire is a 12 AWG stranded copper conductor with XHHW/XHHW-2 insulation, rated for 600 V. It is suitable for general-purpose power distribution in conduit, raceway, and cable tray installations in commercial and industrial settings.

SOUTHWIRE

SOUTHWIRE Copper XHHW/XHHW-2 Building Wire

BrandSOUTHWIRE

Sign inAvailable

This duplex receptacle is rated 125V AC and 20A with a NEMA 5-20 configuration, 2-pole/3-wire design, and white finish. It is used for powering standard 20A equipment in residential, commercial, and light industrial settings.

LEVITON

LEVITON 7380-W Duplex General Purpose Receptacle

BrandLEVITON

Sign inAvailable

EATON

EATON 10250T397LLD2A-53 Illuminated Extended-Length Push Button

BrandEATON

Sign inAvailable

This one-hole compression lug is designed for terminating 2/0 AWG stranded copper wire. It features a 1/4 in stud size and a long barrel type, suitable for use in electrical panels, motor control centers, and power distribution systems where secure, low-resistance connections are required.

OEM

OEM One-Hole Compression Lug, 2/0 AWG, 1/4 in Stud Size, Long Barrel, Copper

BrandOEM

Sign inAvailable

Single-conductor 14 AWG solid copper building wire with green PVC insulation, rated 600 V and THHN/THWN-2 for dry or wet locations. Used for general-purpose power and lighting circuits in residential, commercial, and industrial installations. Supplied in a 1000 ft length.

OEM

OEM APPROVED VENDOR 14 AWG Solid Green THHN/THWN-2 Building Wire, 1000 ft

BrandOEM

Sign inAvailable

OEM

OEM APPROVED VENDOR HY55 Series Miniature Push Button

BrandOEM

Sign inAvailable

← Prev 1…117 118 119 120 121…6105 Next →