bolt

Electrical & Automation

Industrial electrical & automation components — circuit protection, contactors, relays, PLCs, drives and controls from trusted brands for Singapore industry.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 1633 of 6105

PANDUIT

PANDUIT Category 6A RJ45 Jack Module, Orange, 1 Port, Copper, CJ6X88TGOR

BrandPANDUIT

Sign inAvailable

This 2-pole miniature circuit breaker features a C-curve trip characteristic and is UL489 listed for branch circuit protection. Rated 30A with a maximum interrupting rating of 10kA at 277/480V AC and 125V DC, it uses screw clamp terminals for secure wiring. Designed for DIN rail mounting in industrial and commercial distribution panels.

Siemens

Siemens 5SJ42307HG42 C-Curve 2-Pole UL489 DIN Rail-Mount

BrandSiemens

Sign inAvailable

Bolt-on, fast-acting fuse rated 400 A and 80 V DC with indicating feature for AC/DC circuits. Suitable for overcurrent protection in industrial power distribution, control panels, and DC drives. Equivalent to ANN and CNN series.

MERSEN

MERSEN CNN400 Fast-Acting Bolt-On Fuse, 400 A, 80 V DC, Indicating

BrandMERSEN

Sign inAvailable

Steel back panel for interior mounting inside electrical enclosures. Provides a mounting surface for components such as DIN rails, terminal blocks, and circuit breakers. Overall height 46.2 inches, overall width 34.2 inches.

HAMMOND

HAMMOND EP4836 Steel Interior Mounting Back Panel, 46.2 x 34.2 in

BrandHAMMOND

Sign inAvailable

Steel hanger for supporting 1/2 in EMT conduit and 4 in square boxes from threaded rods. Features a corrosion-resistant gray coating and 1/4-20 threaded rod mount with screw mounting. CEC compliant. Suitable for commercial and industrial electrical installations.

NVENT CADDY

NVENT CADDY EMT Conduit & Box Hanger

BrandNVENT CADDY

Sign inAvailable

Fusible bus plug for tapping power from busway systems. Rated 30 A at 240V AC, 3-phase, 3-wire with ground. Accepts H/K/R fuse classes. Suitable for industrial and commercial power distribution applications.

SQUARE

SQUARE D PQ3203G Fusible Bus Plug

BrandSQUARE

Sign inAvailable

Single-conductor GXL wire with 16 AWG size and cross-linked polyethylene (XLPE) insulation. Rated for 60 V and suitable for general purpose primary wiring in vehicles, trailers, and off-road equipment. Gray jacket, 500 ft length.

OEM

OEM GXL XLPE-Insulated General Purpose Primary Wire, 16 AWG, Gray, 500 ft, 60 V

BrandOEM

Sign inAvailable

Single general-purpose receptacle rated 125V AC and 20 A with a 5-20 configuration. Features 2 poles, 3 wires, and an ivory finish. Suitable for powering equipment in commercial and industrial settings such as offices, labs, and light manufacturing.

HUBBELL

HUBBELL HBL5361I Single Receptacle, 5-20, Ivory, 125V AC, 20 A, 2 Pole/3 Wire

BrandHUBBELL

Sign inAvailable

Bolt-on miniature circuit breaker for overcurrent protection in single-phase systems. Rated 15 A, 277V AC, with an interrupting capacity of 18 kA at 120/240V AC. Suitable for use in Square D NF panelboards in commercial and industrial power distribution applications.

SQUARE D

SQUARE D EDB14015EPD Miniature Circuit Breaker

BrandSQUARE D

Sign inAvailable

This partially insulated piggyback disconnect features a socket/tab design for 0.25 in x 0.032 in tabs, with heat shrink partial coverage. It is used for quick electrical connections in control panels, motor circuits, and power distribution systems, allowing daisy-chaining multiple wires on a single tab.

OEM

OEM Partially Insulated Piggyback Disconnect with Heat Shrink

BrandOEM

Sign inAvailable

← Prev 1…1631 1632 1633 1634 1635…6105 Next →