bolt

Electrical & Automation

Industrial electrical & automation components — circuit protection, contactors, relays, PLCs, drives and controls from trusted brands for Singapore industry.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 1695 of 6105

Miniature snap-action switch with plunger actuator and 1NO contact configuration. Rated for 21 A at 277 V AC, with quick-connect terminals. Suitable for position sensing, limit switching, and interlock circuits in industrial controls and automation.

Honeywell

Honeywell V7-1V29E9 Plunger Snap-Action Switch, 21 A @ 277 V AC, Quick Connect

BrandHoneywell

Sign inAvailable

12-gauge electroplated steel single strut channel with punched holes on three sides. Holes are 9/16-inch diameter spaced 1-1/2 inches center to center. Used for mounting and support of electrical, mechanical, and industrial equipment in commercial and industrial construction.

KINDORF

KINDORF B 995 10 Punched Holes Strut Channel

BrandKINDORF

Sign inAvailable

Time-delay axial-leaded fuse rated 8 A and 500 V AC. Non-indicating design with 5 mm x 20 mm form factor. Provides overcurrent protection in circuits with inrush currents, such as motors and transformers.

LITTELFUSE

LITTELFUSE 0477008.MXEP Time-Delay Axial-Leaded Fuse

BrandLITTELFUSE

Sign inAvailable

This 3-pole non-reversing IEC contactor is rated for 115 A with three normally open contacts. It operates with a 48V AC coil at 60Hz and includes integrated surge suppression. Suitable for switching motors and other loads in industrial control panels.

SCHNEIDER

SCHNEIDER LC1D115A6EHE Non-Reversing IEC Contactor

BrandSCHNEIDER

Sign inAvailable

BRYANT

BRYANT 8200HBGRYTR Hospital Grade Duplex Receptacle, 5-15R, Gray, 125V AC, 15A

BrandBRYANT

Sign inAvailable

Yellow vinyl-insulated locking fork terminals with funnel-entry barrel. Accept 12 AWG to 10 AWG wire and fit #8 stud size. Used for secure, removable connections in control panels, machinery, and power distribution systems.

OEM

OEM Insulated Fork Terminals, Yellow Vinyl, #8 Stud, 12-10 AWG, Locking Fork

BrandOEM

Sign inAvailable

Galvanized steel conduit clamp for securing 1 in conduit to 1-5/8 in strut channels. Features 1/4 in-20 thread size and 1.000 in cable range. Suitable for supporting conduit runs in industrial and commercial electrical installations.

B-LINE BY EATON

B-LINE BY EATON B1516 Conduit Clamp, Steel, Galvanized, 1 in Trade Size

BrandB-LINE BY EATON

Sign inAvailable

Single-pole maintained toggle wall switch in ivory finish. Rated 15 A at 120/277 V AC. Non-illuminated. For controlling lighting or other loads from one location in commercial and industrial settings.

HUBBELL

HUBBELL HBL1201STI Single-Pole Maintained Toggle Wall Switch

BrandHUBBELL

Sign inAvailable

Single-ended cordset with a yellow PVC jacket for flexing applications. Features an M8 male straight connector on one end and bare wire on the other, with 3 pins, 24 AWG wire, and a 10 m cable length. Rated IP67 and NEMA 6P for protection against dust and water ingress. Suitable for connecting sensors or actuators in industrial automation and material handling equipment.

BRAD HARRISON

BRAD HARRISON Single-Ended Cordset

BrandBRAD HARRISON

Sign inAvailable

Molded case circuit breaker rated 90 A, 2-pole, 240 V AC with a maximum interrupting rating of 25 kA at 240 V AC. Features fixed instantaneous trip, lug terminals, and BC phase connection. Suitable for use in I-Line panelboards for overload and short-circuit protection in power distribution systems.

SQUARE D

SQUARE D QDA220904 Molded Case Circuit Breaker

BrandSQUARE D

Sign inAvailable

← Prev 1…1693 1694 1695 1696 1697…6105 Next →