bolt

Electrical & Automation

Industrial electrical & automation components — circuit protection, contactors, relays, PLCs, drives and controls from trusted brands for Singapore industry.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 3269 of 6105

MURRELEKTRONIK

MURRELEKTRONIK Cordset: M12 Male Straight X Bare Wire, 4 Pins, Black, PVC, 0.6 m Cable Lg

BrandMURRELEKTRONIK

Sign inAvailable

This non-fusible disconnect switch is rated for 60 A and 600V AC, three-phase operation. It features a red handle and a PBT housing, and is UL Listed for indoor and outdoor environments. Used to safely isolate electrical circuits in industrial and commercial power distribution systems.

HUBBELL WIRING DEVICE-KELLEMS

HUBBELL WIRING DEVICE-KELLEMS HBLDS60AC Non-Fusible Disconnect Switch

BrandHUBBELL WIRING DEVICE-KELLEMS

Sign inAvailable

EATON

EATON EHD3025 FD-Frame Molded Case Circuit Breaker

BrandEATON

Sign inAvailable

The GE CR463M80NJA is an 8-pole mechanically held lighting contactor rated for 30 A with a 120V AC control voltage. It uses a 3-wire control configuration for reliable switching of large lighting loads. Typical applications include remote control of lighting in commercial and industrial facilities, such as warehouses, parking lots, and building automation systems.

GE CR463M80NJA Mechanically Held Lighting Contactor

BrandGE

Sign inAvailable

Blue heat shrink tubing with 1 in inner diameter before shrinking and 0.5 in after shrinking. Used for insulating and protecting electrical wires, cables, and connections from moisture, abrasion, and short circuits. Shrinks tightly around components when heated.

OEM

OEM APPROVED VENDOR Standard Heat Shrink Tubing

BrandOEM

Sign inAvailable

BURNDY

BURNDY AYP350 Pin Terminal Compression Adapter, 250 kcmil, Straight, Copper

BrandBURNDY

Sign inAvailable

Industrial RJ45 plug insert for Cat6 cable termination. Straight insulation displacement male connector with 8 poles. Suitable for use in industrial Ethernet networks requiring reliable data transmission.

METZ CONNECT RJ45

METZ CONNECT RJ45 Data Insert

BrandMETZ CONNECT RJ45

Sign inAvailable

Stranded copper building wire with THHN/THWN-2 insulation, rated 600 V. Single conductor, 300 kcmil, black jacket, 1,000 ft length. Used for general-purpose power distribution in conduit, raceway, or cable tray installations.

SOUTHWIRE

SOUTHWIRE 300 kcmil THHN/THWN-2 Building Wire, 600 V, 1,000 ft, Black

BrandSOUTHWIRE

Sign inAvailable

Steel enclosure with solid hinged cover and quick release latch. Rated NEMA 12/13 for protection against dust, dirt, oil, and non-corrosive liquids. No knockouts included. Suitable for indoor industrial applications housing electrical controls, terminals, and instruments.

HOFFMAN

HOFFMAN A1008CHQR Steel Dust-Tight Enclosure

BrandHOFFMAN

Sign inAvailable

Standard heat shrink tubing with 0.81 in inner diameter before shrinking and 0.37 in after shrinking. Each piece is 6 in long, black, and sold in a pack of 5. Used to insulate and protect electrical connections, wires, and cables from moisture, abrasion, and short circuits.

IDEAL

IDEAL Standard Heat Shrink Tubing

BrandIDEAL

Sign inAvailable

← Prev 1…3267 3268 3269 3270 3271…6105 Next →