Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 136 of 4547

This high-precision clamp-on beam shaft coupling from RULAND MANUFACTURING features a 5/16 in bore diameter with same bore dimensions, inch size, round design, and no keyway. It accommodates up to 3° of angular misalignment, making it suitable for motion control applications such as servo systems, encoders, and linear actuators where accurate positioning is required.

RULAND MANUFACTURING

RULAND MANUFACTURING High-Precision Clamp-On Beam Shaft Coupling

BrandRULAND MANUFACTURING

Sign inAvailable

Closed-loop L-section trapezoidal timing belt with 0.375 in pitch, 1 in top width, and 160 teeth. Constructed of polyurethane for positive drive and accurate synchronization in power transmission systems. Suitable for applications requiring precise timing and motion control.

MEGADYNE Megapower 600L075US L Section Trapezoidal Timing Belt

BrandMEGADYNE

Sign inAvailable

This split taper bushing has a 28 mm bore diameter, 3.13 in bolt circle diameter, and 1.938 in overall length. It features a 3/4 in per ft taper for mounting pulleys, sprockets, and couplings onto shafts in power transmission systems.

OEM Split Taper Bushing, 28 mm Bore, 3.13 in Bolt Circle, 1.938 in Overall Length

BrandOEM

Sign inAvailable

Metric tapered roller bearing assembly with 35 mm bore, 72 mm OD, 28 mm cone width, and 22 mm cup width. Constructed with carbon steel rings and a pressed steel cage. Supports combined radial and axial loads in industrial machinery such as gearboxes, conveyors, and pumps.

NTN 4T-33207 Tapered Roller Bearing Assembly, 35 mm Bore, 72 mm OD

BrandNTN

Sign inAvailable

This flanged sleeve bearing is made from SAE 841 bronze and pre-lubricated with SAE 90 Oil with PTFE. It has a 3/4 in bore, 1 in OD, and 1 1/2 in length, with a temperature range of -40°F to 460°F. Suitable for low-speed, high-load applications such as conveyors, packaging machinery, and agricultural equipment. Sold in a pack of 3.

BUNTING BEARINGS

BUNTING BEARINGS Flanged Sleeve Bearing: SAE 841 Bronze

BrandBUNTING BEARINGS

Sign inAvailable

This high-precision clamp-on beam shaft coupling accommodates 3° angular misalignment. It has an 8 mm bore diameter on both ends, a round body, and is made of aluminum. No keyway is included. Typical applications include connecting shafts in motion control systems where accurate torque transmission and misalignment compensation are required.

RULAND MANUFACTURING

RULAND MANUFACTURING High-Precision Clamp-On Beam Shaft Coupling

BrandRULAND MANUFACTURING

Sign inAvailable

GATES PowerGrip GT3 Timing Belt 158-2MGT-06, 2 mm Pitch, 6 mm Width

BrandGATES

Sign inAvailable

This INA needle roller thrust bearing washer has an outside diameter of 3 1/4 inches and a washer thickness of 1/32 inch. It is compatible with bearing 4052. Used as a hardened raceway surface in needle roller thrust bearing assemblies to support axial loads in industrial machinery such as gearboxes, pumps, and automotive transmissions.

INA TWA4052 Needle Roller Thrust Bearing Washer, 3 1/4 in OD, 1/32 in Thick

BrandINA

Sign inAvailable

Steel sprocket for Size 40 roller chain with 48 teeth, 7.645 in pitch diameter, and 7.93 in outside diameter. Requires SDS bushing series. Used in roller chain drive systems to transmit rotary motion between shafts in industrial machinery and conveyors.

TRITAN Size 40 Bushed-Bore Roller Chain Sprocket, 48 Teeth, Steel, 40SDS48

BrandTRITAN

Sign inAvailable

This keyless bushing provides a shaft-to-hub connection without keyways or set screws, using a multi-screw locking assembly for a secure, backlash-free fit. It is made of oil-dipped steel and has an outer diameter of 80 mm, a width of 32 mm, and fits a 50 mm shaft. Typical applications include power transmission systems such as conveyors, pumps, and gearboxes.

CLIMAX METAL PRODUCTS

CLIMAX METAL PRODUCTS C200M-50X80 Multi-Screw Locking Assembly

BrandCLIMAX METAL PRODUCTS

Sign inAvailable

← Prev 1…134 135 136 137 138…4547 Next →