OEM Self-regulating heating cable K20A25 (coil 25m)
The OEM K20A25 is a self-regulating heating cable supplied as a 25 m coil, delivering approximately 20 W/m at 10°C to maintain the temperature of fluids inside pipes. It uses a 1.25 mm² conductor and operates across…
SKU 3G-CBM-03618
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The OEM K20A25 is a self-regulating heating cable supplied as a 25 m coil, delivering approximately 20 W/m at 10°C to maintain the temperature of fluids inside pipes. It uses a 1.25 mm² conductor and operates across a -20°C / +80°C temperature range, with a minimum bending radius of 25 mm. The cable automatically varies its heat emission without control thermostats, and its self-adjusting feature optimises energy consumption. 3G Electric supplies this cable alongside a broad range of industrial equipment, parts and supplies across 14 industrial departments, backed by deep specialist expertise in combustion, pumps and controls.
Frequently Asked Questions
What is the OEM K20A25 self-regulating heating cable used for?
The OEM K20A25 is a self-regulating heating cable designed to maintain the temperature of fluids inside pipes and vessels in industrial freeze-protection and process-heating systems. It delivers approximately 20 W/m at 10°C across its 25 m length and adjusts its heat output automatically without a control thermostat.
What are the specifications of the OEM K20A25 heating cable?
The OEM K20A25 is a 25 m K20A self-regulating heating cable rated at approximately 20 W/m at 10°C, with 1.25 mm² conductors and a 25 mm minimum bending radius. It operates on 230 V-50 Hz supply and is rated for -20°C to +80°C, with a maximum heating circuit length of 170 m.
How should the OEM K20A25 heating cable be installed?
The OEM K20A25 can be cut to length and secured along the pipe with K50 fixing tape for steel pipes or K50AL for plastic pipes, observing a 25 mm minimum bending radius. Seal the cable ends with KIT2A, keep the two conductors insulated and never in contact, and fit a C01A, C03A or L03BM1A thermostat to disconnect the cable at the desired fluid temperature. An insulating coating over the cable is advisable.
Where to buy the OEM K20A25 self-regulating heating cable worldwide?
3G Electric supplies the OEM K20A25 self-regulating heating cable worldwide, handling full logistics, customs and delivery to your site. Contact us with your pipe or vessel heating requirements for a quote and lead time. The cable carries CSTB homologation.
Used in
Common applications for OEMOEM Products
3G Electric supplies OEM controls & actuators. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
