OEM Constant power/thermal heating cable K10C9KIT (9m spool)
The OEM K10C9KIT is a 9 m antifreeze heating cable kit with constant power of approximately 10 W/m, supplied as a heating cable complete with a contact thermostat and a power cable with Schuko plug for direct…
SKU 3G-CBM-03610
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The OEM K10C9KIT is a 9 m antifreeze heating cable kit with constant power of approximately 10 W/m, supplied as a heating cable complete with a contact thermostat and a power cable with Schuko plug for direct connection to a 230V-50Hz mains supply. The cable is actuated when the contact temperature drops below +5°C and switches off automatically when the temperature exceeds +15°C, operating across a temperature range of -30 to +150°C with a 9 mm cable diameter. It is intended to help avoid possible damage caused by low temperatures on pipes, valves, taps, water meters, water troughs, vessels and small tanks, and is compliant with Directive 2014/35/EU and Standard EN60335-1. 3G Electric supplies this kit alongside a broad range of industrial equipment, parts and supplies across 14 industrial departments, backed by deep specialist expertise in combustion, pumps and controls.
Frequently Asked Questions
What is the OEM K10C9KIT heating cable?
The OEM K10C9KIT is a constant-power antifreeze heating cable kit supplied on a 9 m spool. It delivers approximately 10 W/m at 230V-50Hz and includes a contact thermostat plus a power cable with Schuko plug, intended for pipe tracing and equipment heating.
What are the specifications of the OEM K10C9KIT heating cable?
The OEM K10C9KIT has a 9 m cable length, 9 mm diameter, 230V-50Hz power supply, and constant power of approximately 10 W/m. Its thermostat switches on at +5°C and off at +15°C, with an IPX7 protection rating and compliance with Directive 2014/35/EU and Standard EN60335-1.
How do you install the OEM K10C9KIT heating cable?
The OEM K10C9KIT is ready for use with a Schuko plug and built-in thermostat, so installation is simple and fast. Secure the cable to the pipe with fixing tape (K50 for steel or K50AL for plastic pipes), keep the cable as long as the piping, avoid overlapping, and apply an insulating coating over the cable for correct installation.
Where to buy the OEM K10C9KIT heating cable worldwide?
3G Electric supplies the OEM K10C9KIT heating cable worldwide and handles full logistics, customs, and delivery. Contact us for lead time and availability; we source and deliver across 14 industrial departments and far more than is listed.
Used in
Common applications for OEMOEM Products
3G Electric supplies OEM controls & actuators. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
