OEM Self-regulating heating cable K30A100 (100m spool)
The OEM K30A100 is a self-regulating heating cable supplied on a 100 m spool, designed to maintain the temperature of fluids inside pipes. Its self-adjusting conductive core delivers approximately 30 W/m at 10°C…
SKU 3G-CBM-03624
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The OEM K30A100 is a self-regulating heating cable supplied on a 100 m spool, designed to maintain the temperature of fluids inside pipes. Its self-adjusting conductive core delivers approximately 30 W/m at 10°C, with a 1.25 mm² conductor, polyolefin insulation, and a braided copper sheath. The cable can be cut to length, has a minimum bending radius of 25 mm, and operates without control thermostats, varying heat emission according to temperature.
Frequently Asked Questions
What is the OEM K30A100 self-regulating heating cable used for?
The OEM K30A100 is a self-regulating heating cable supplied on a 100 m spool, delivering approximately 30 W/m at 10°C. It is designed for pipe freeze protection and temperature maintenance, suitable for maintaining the temperature of liquids inside pipes in industrial piping systems.
What are the specifications of the OEM K30A100 heating cable?
The OEM K30A100 has a 1.25 mm² self-adjusting conductive core, polyolefin insulation, and a braided copper sheath. Cable dimensions are 14.6 x 4.8 mm, minimum bending radius is 25 mm, and power output is ~30 W/m at 10°C. It operates on 230 V 50 Hz with a tolerance of -0/+5 W, and the maximum heating circuit length from the supply point is 140 m.
How do you install and maintain the OEM K30A100 heating cable?
The cable can be cut to length and secured along the pipe with K50 fixing tape for steel pipes or K50AL for plastic pipes. Keep the minimum bending radius of 25 mm, seal the ends with KIT2A, and ensure the two conductors remain insulated and never contact each other. A C01A, C03A, or L03BM1A thermostat can disconnect the cable at the desired fluid temperature to minimise energy consumption, and an insulating coating over the cable is advisable.
Used in
Common applications for OEMOEM Products
3G Electric supplies OEM controls & actuators. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
