OEM Self-regulating heating cable K30A50 (50m spool)
The OEM K30A50 is a self-adjusting heating cable supplied on a 50 m spool, delivering approximately 30 W/m at 10°C to maintain the temperature of fluids inside pipes. Its self-adjusting construction varies heat…
SKU 3G-CBM-03623
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The OEM K30A50 is a self-adjusting heating cable supplied on a 50 m spool, delivering approximately 30 W/m at 10°C to maintain the temperature of fluids inside pipes. Its self-adjusting construction varies heat emission without control thermostats, and the cable can be cut to the desired length, with a 25 mm minimum bending radius and 1.25 mm² conductors in a 14.6 x 4.8 mm profile. Rated for a maximum unpowered room temperature of 80°C and storage down to -20 to -25°C, it is secured along pipes with K50 or K50AL fixing tape, and a C01A, C03A or L03BM1A thermostat can be used to disconnect the cable at the desired fluid temperature.
Frequently Asked Questions
What is the OEM K30A50 self-regulating heating cable?
The OEM K30A50 is a self-adjusting heating cable supplied on a 50 m spool, delivering approximately 30 W/m at 10°C. It is designed to maintain the temperature of fluids inside pipes and for freeze protection in industrial piping and equipment.
What are the specifications of the OEM K30A50 heating cable?
The OEM K30A50 has a 1.25 mm² conductor, cable dimensions of 14.6 x 4.8 mm, a minimum bending radius of 25 mm, and a 50 m spool length. It operates on 230 V-50 Hz, delivers ~30 W/m at 10°C, and has a maximum heating circuit length of 140 m from the supply point.
How should the OEM K30A50 heating cable be installed?
The cable can be cut to length and secured along the pipe with K50 fixing tape for steel pipes or K50AL for plastic pipes. Keep the two conductors insulated at the end using KIT2A end seal kit and never let them contact each other. A C01A, C03A or L03BM1A thermostat is recommended to disconnect the cable at the desired fluid temperature, and an insulating coating should be applied over the cable.
Where to buy the OEM K30A50 self-regulating heating cable worldwide?
3G Electric supplies the OEM K30A50 worldwide and handles full logistics, customs, and delivery. Contact us for lead time and availability. The product carries CSTB homologation.
Used in
Common applications for OEMOEM Products
3G Electric supplies OEM controls & actuators. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
