OEM Self-regulating heating cable K30A25 (spool of 25m)
The OEM K30A25 is a self-adjusting heating cable supplied on a 25 m spool, delivering approximately 30 W/m at 10°C to maintain the temperature of fluids in pipes. Its self-regulating conductive core varies heat…
SKU 3G-CBM-03622
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The OEM K30A25 is a self-adjusting heating cable supplied on a 25 m spool, delivering approximately 30 W/m at 10°C to maintain the temperature of fluids in pipes. Its self-regulating conductive core varies heat output with temperature, reducing energy consumption without requiring a control thermostat. The cable is constructed with 1.25 mm² conductors, a polyolefin insulating sheath, and a braided copper sheath, and has a minimum bending radius of 25 mm. It can be cut to length and is suitable for installation in ambient temperatures from -35°C to 65°C when powered, and up to 80°C when unpowered.
Frequently Asked Questions
What is the OEM K30A25 self-regulating heating cable used for?
The OEM K30A25 is a self-adjusting heating cable supplied on a 25 m spool, used to maintain the temperature of fluids inside pipes and for freeze protection in industrial piping. It delivers approximately 30 W/m at 10°C and adjusts its heat output automatically without a control thermostat.
What are the specifications of the OEM K30A25 heating cable?
The OEM K30A25 is a 25 m spool of self-adjusting heating cable rated at approximately 30 W/m at 10°C, powered at 230 V - 50 Hz with a tolerance of -0/+5 W. It has 1.25 mm² conductors, a self-adjusting conductive core, polyolefin insulating sheath and braided copper sheath, a minimum bending radius of 25 mm, and a maximum heating circuit length of 140 m from the supply point.
How should the OEM K30A25 heating cable be installed?
The OEM K30A25 can be cut to the desired length and secured along the pipe with K50 fixing tape for steel pipes or K50AL for plastic pipes. Keep the minimum bending radius of 25 mm, seal the cable ends with KIT2A so the two conductors stay insulated and never touch, and apply an insulating coating over the cable. A C01A, C03A or L03BM1A thermostat can be used to disconnect the cable at the desired fluid temperature to minimise energy consumption.
Where to buy the OEM K30A25 self-regulating heating cable worldwide?
3G Electric supplies the OEM K30A25 self-regulating heating cable (SKU 3G-CBM-03622) worldwide, handling logistics, customs and delivery to your site. Contact us with your pipe length and temperature requirements for a quote and lead time. The cable carries CSTB homologation.
Used in
Common applications for OEMOEM Products
3G Electric supplies OEM controls & actuators. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
